American Towel Rack Apollo RXAP-1050500-CH, Руководство по установке

Страница: 19 / 28

www.americantowelrack.com
Premier Curved Weight
(lbs) Fixing Centres (H)
+/- 0.07” Fixing Centres (L) Height (”) Length (”)
+/- 0.07”
RXPC-0800500 13.2 24.56 13.77
RXPC-1200600 22.4 39.92 17.71
RXPC-1500600 30.4 52.20 17.71
31.49
47.24
59.05
19.68
23.62
23.62
Installation:
1) Front Cover Cap
2) Bracket Assembly
3) Bracket Securing Part
4) Bracket Stem 5) Bracket Wall Support
6) Bracket Securing Screw
7) Wall Screw
8) Wall Plug
1
2
3 4
5
6
7 8
Step 1: Select the desired mounting position, make sure the wall
is adequate to take the fixing points of the rail i.e anchor
points must be securely attached to a stud or masonry.
It is NOT
recommended that this unit is installed into Drywall Only.
Step 2: Loosely screw the wall support (Part 5) into the wall
using the wall screw (7) and washer. Use wall plug (8) if you are
fixing into Masonry. Do no tighten full. (Top: The mini screw hole
in the side of the wall support (5) should be facing the floor
Step 3: Adjust wall support and, with the aid of a spirit-level,
tighten
Step 4: Through the bars of the radiator, align the bracket
securing part (3) with the bracket stem and wall support (4).
Manoeuvre the rail back towards the wall. Once fitted, tighten
the Bracket Assembly Screw (2)
Step 5: Insert the Bracket Securing Screw (6) to secure. Fit the
cover caps (1) to finish
Cleaning:
-
Do not use any abrasive or chemical cleaners to clean the
radiators as this will cause damage to the surface finish. Please
use warm water and a damp cloth.
- Do not clean when hot.
19