RA216 User Manual
4. Fitting the battery in the handset:
Two rechargeable batteries come with your phone.
-
Insert the rechargeable batteries into the handset as the above figure indicates,
matching correct polarity (+, -)
-
Fit the battery compartment cover by sliding it down so that it clicks firmly into
place.
NOTE: Reversing the orientation may damage the handset. Please
use the battery type supplied, or recommended equivalents. A
different battery could cause an explosion or damage your phone.
Charging the Handset Batteries
Before using the handset, charge the handset for at least 12 hours.
Whenever the battery icon on the LCD screen becomes nearly empty, or you have
heard the low battery warning tone during a call conversation, please:
-
End the call as soon as possible.
-
Do not use the speakerphone mode for conservation since this may cause the
handset to power off.
-
Put the handset into the cradle for charging until the battery icon returns to
a
high
level.
To charge the handset, put the handset into the base cradle face-up. The charging
LED on
the
base unit will come on to indicate that the handset is in charging mode,
and
the
“Battery” icon in the LCD screen of
the
handset will be flashing.
Last Updated: 8/15/2006 10:21:16 AM
RA216
12
