2
ApplicATion
the night vision binocular is a complex opticoelectronic system for individual use. the device
consists of the objective lenses, eyepieces and the body. the body contains two 1st Gen.+
image intensifier tubes assembled with an integrated high voltage power source and two three-
volt battery housing. When installing the batteries one should keep in mind that the polarity of
the batteries should coincide with the diagram on the body next to the battery housing cap.
objective lens protective covers are intended to protect the objective lens from dust and
scratches. they will also act as daylight filter allowing you to test the binocular in daylight or
other bright light situations. the pin-holes in the center of the protective covers allow the user
to check the operational capability of the device in daylight conditions.
the scope is equipped with the automatic Shut-off System. this system tracks when the
scope is not used (the controls are not touched for 60 minutes continuous) and shuts the unit
off automatically.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens caps
on for more than ten (10) minutes.
smArT DigiTAl Technology
Smart total Darkness technology finally provides the user total control in the hi-tech industry
of night vision. the Smart Series night vision binocular have been designed according to the
latest computer technology. on board computer systems identify the users intention of look-
ing through the binocular. When the binoculars are brought to the user’s eyes, the binoculars
will automatically turn on. When removed from the eyes the binoculars will turn off (you must
engage the proximity sensor for this feature to work). the user will never have to worry about
turning his or her binoculars on or off. Smart series binocular automatically sense when they
are no longer used and shut off and enter their sleep mode. Both the controls and buttons are
digital. even if your batteries are low don’t worry the smart series will let you know.
our night Scout binocular have a 3 button digital control panel that allows the user to easily
engage the main power, Infra-red illuminator and the proximity sensor. Color coded LeDs let
you know the mode of operation you are using.
1. on/oFF indicator light - when power is on, the LeD is be green.
2. When the proximity sensor is activated the LeD will change to red.
3. When Ir is on the LeD is orange.
NOTE: You may notice a persistent green glow for up to five (5) minutes after you have turned the
unit off. This is normal for the 1st Gen. light intensifier tube.
focusing
to focus the night Scout first you will need to adjust the diopters. Simply turn the diopters
clockwise until they stop. then, while looking through the diopters at an object, slowly turn the
diopters back counter clockwise until the grain in the image is sharp.
feATures
• Great for hunting, camping, boating or
surveillance
• Total darkness technology
• Automatic brightness control
• Built-in IR illuminator
• Manual focus
• Adjustable eyepiece
• High res. 1st Gen.+ intensifier tube
• Rugged and versatile design
• Light weight and comfortable
• Water and dust resistant
• Smart Technology - see description
• Superb 5x lens system
• Soft case
• Camera adaptability
• Two year warranty