STUDIO
®
SHOWER & BATH WALLS
MODELS: 2946.BW & 2946.SW
7 5 5 14 0 - 10 0
PREPARATION:
TOOLS:
TOOLS & MATERIALS REQUIRED....
Studio
®
shower walls are to be installed directly
over stud walls. Drywall is not required.
• Drill & Hole Saw or Sabre Saw
• Tape Measure
• Caulking Gun
• Pencil
• Square
• Level
A) Remove dry wall surface and ensure that
alcove is plumb and square. (
Illustration 1)
MATERIALS:
• Acrylic/Latex or Acrylic/Silicone Sealant
• Galvanized (or corrosion resistant) flat head
screws 3/4" minimum length
• 2 x 4 lumber for additional wall studs as required
• Tub Surround Adhesive
• 1 x 4’s if installing shower doors
USE SHOWER WALL 2946.SW WITH SHOWER BASE 2946.STR or 2946.STL
USE BATH WALL 2946.BW WITH BATH TUB 2946.102 or 2946.202
Illustration 1
Installation for Model# 2946.SW
The studs should be located as shown to
properly support walls. Provide additional
studs where illustrated.
B) Identify your model number in the illustrations
which follow. Prepare studs as indicated.
8"
(203mm)
10-1/2"
(267mm)
32"
(813mm)
6"
(152mm)
12"
(305mm)
60"
(1524mm)
9-1/4"
(235mm)
9-1/4"
(235mm)
10"
(254mm)
10"
(254mm)
S
A
VE FOR FUTURE USE
Local building codes vary by location. Observe all local plumbing and building codes.
Unpack your new shower walls and inspect them carefully for damage. Verify that the walls are the correct size for your
installation. Refer to American Standard roughing-in information for specific dimensions for each model.
To ensure maximum performance and pleasure from this product, please follow the instructions and cautions.
BEFORE YOU BEGIN....
!
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
NOTE:
Take extra care in handling surfaces of the walls. Use only non-abrasive cloths to avoid scratching.
INSTALLATION INSTRUCTIONS
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
© AS America, Inc. 2016
Each alcove
stud must
be plumb
and square.
(Left hand shower base shown)
