CHECK
CONNECTIONS
FOR LEAKS
1
2
3
5
4
• Move HANDLE
(1)
into “off” position.
• Turn on water supplies and check connections for leaks.
• With HANDLE
(1)
in “off” position, unthread AERATOR
(4)
from SPRAY HEAD
(2)
with AERATOR KEY
(5)
.
• Operate HANDLE
(1)
up and down, left and right to flush water lines thoroughly.
• Thread AERATOR
(4)
onto SPRAYHEAD
(2)
with AERATOR KEY
(5)
.
• Press and hold the FILTER ACTIVATION BUTTON
(3)
for approximately 5 seconds. The filter will run for 1 minute.
Check connections for leaks.
• This concludes the installation of your filtration faucet.
PREPARE FAUCET & CHECK CONNECTION FOR LEAKS
8
- 7 -
M985028 (3/20)
