8
7
- 3 -
5
Jan .19
Rev.05
6
ASSEMBLE THE TANK
After the above installation, check level of the toilet.
CHECK LEVEL
FINISH THE TOILET
Attach the water supply hose.
Install the seat & cover according to seat & cover
installation manual.
Apply a silicone putty along the intersecting
edge of the toilet base and floor, ensuring a
complete seal. Remove excess sealant.
POSITION THE TOILET
Lift the toilet with the tank trim assembly, position
the toilet on the floor as picture shown.
Attach the water supply hose properly to the water
control valve on the tank and tighten snugly by hand.
Assemble the tank fittings.
Silicone
Note
: Silicone is not supplied in the packaging.
Using cement to fix the toilet is prohibited.
Please leave more than 24 hours for
concretion.
