background image

SPREAD LAVATORY

FAUCETS

Installation

Instructions

Thank you for selecting American-Standard...

the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M

M 9 6 5 0 4 6   R e v. 1 . 3

Turn VALVES 

(1)

 to off position.

Insert ADAPTOR 

(7)

 with larger diameter over the VALVE STEM 

(4)

.

Align LEVER 

(2)

 or WRIST BLADE HANDLE 

(3)

 and install onto VALVE STEM 

(4)

.

Insert BLUE INDEX 

(5)

 into cold valve (right side) and red INDEX 

(6)

 into hot valve (left side).

Insert HANDLE SCREW 

(6)

 into HANDLES and tighten with screwdriver.

INSTALL HANDLES

2

Turn off water at

main supply.

CAUTION

Adjustable Wrench

 Screwdriver

Channel Locks

Recommended tools

Tubing Cutter

4

1

3

7

2

5

6

6530.173

6540.180

6545.Series

8

3

1

2

1

Push TUBING 

(7)

 ends into VALVES

 (6, 6a) 

side outlets. Insert VALVES 

(6, 6a)

into mounting holes from underside of ledge.

Install LOCKNUTS 

(1)

, BRASS WASHERS 

(2)

 and RUBBER WASHERS 

(3) 

onto

valve shanks.

Place RUBBER RING 

(8)

 into ESCUTCHEON 

(9)

 and thread onto VALVES 

(6, 6a)

until snug against internal stop.
Tighten LOCKNUT 

(1)

 to secure VALVES

 (6, 6a)

 into position.

Firmly tighten COUPLING NUTS

 (5)

.

Install FERRULE 

(4)

 into COUPLING NUT 

(5).

 Thread onto VALVE 

(6, 6a)

 and

loosely tighten COUPLING NUTS

 (5)

.

Connect HOT water supply to inlet of left VALVE and COLD water supply to inlet of

right VALVE using appropriate connector.

INSTALL VALVE ASSEMBLIES

HOT

COLD

4

6

6a

5

5

4

7

9

8

9

MOUNTING

LEDGE

3

5/16" MIN.

MOUNTING SURFACE

9

3

6

8

1

2

Отзывы: