5
APPLYING SEALANT AND INSTALLING SHOWER HANDLE AND SHOWER HEAD
NOTE:
Allow 24 hours for the wall panel adhesive to dry before applying the sealant.
5a.
Apply a bead of sealant around all corners, outside edges of panels, corner panel and deck of shower
base. (Ref. Illustration A)
5b.
Install the shower handle and shower head per the manufacturer’s instructions. Be sure to apply sealant
to all trim plates.
NOTE:
ALLOW 24 HOURS FOR THE SEALANT TO DRY BEFORE USE.
Install the shower door or shower curtain rod according to the manufacturer’s instructions.
A
POST INSTALLATION CLEAN-UP
Remove all construction debris. Install any accessories, shelves or doors according to manufacturer’s
installation instructions.
Post installation clean-up can be completed using 50/50 mixture of isopropyl alcohol and water.
AFTERCARE AND CLEANING
!
WARNING:
Cleaning products with labels that say “not suitable for use with ABS, acrylic or polystyrene”
SHOULD NOT BE USED. Read all labels carefully.
Clean shower walls with warm soapy water and soft sponge. For stubborn stains, use a 50/50 mix of isopropyl
alcohol and water.
HARSH CHEMICALS SHOULD NEVER BE USED ON SHOWER WALL SURFACE. Clean after use with a mild
liquid household detergent cleaner.
Do not use
Lestoil
®
, Lysol
®
Disinfectant (spray or concentrate), or Lysol
®
Basin,Tub and Tile Cleaner, Windex
®
, Mr. Clean
®
, Dow
®
Disinfectant Bathroom Cleaner, or cleaning products in
aerosol cans.
Do not use wire brushes, knives or sharp objects to remove stains or other surface blemishes.
Abrasive cleaners or powders should not be used as they will dull the surface.
Do not allow nail polish remover, acetone, paint remover or other solvents to come into contact with the surface.
Spic And Span® Is A Registered Trademark Of The Spic And Span Company
