American Standard HURON 3312 Скачать руководство пользователя страница 2

7 3 0174 3 - 10 0   Rev.  B

7

6

5

8

INSTALL TOILET ON FLANGE

a. Unplug wall waste opening and slide    
    toilet towards closet flange so bolts         
    project through mounting holes.

b. Loosely install retainer tapered washers  
    and nuts. Side of washers marked  

  

    "THIS SIDE UP" 

must 

face you!

INSTALL TOILET

a. Position toilet squarely to wall and, with a rocking   
    motion, push bowl against ring and flange. 
Alternately tighten nuts until toilet is firmly anchored.

CAUTION: 

DO NOT OVERTIGHTEN NUTS

                 OR BASE MAY BE DAMAGED!

b. Insert the tapered washers (supplied in the kit)  
    into the lag bolts (not supplied). Insert bolts      
    through mounting holes and tighten into  

   

    pre-drilled floor openings.

c. Install the bolt caps on tapered washers. (If  

  

    necessary, cut wall bolt length to size before     
    installing caps.)    

d. Smooth off the bead of sealant around base.     
    Remove excess sealant.

!

-   2   -

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with 
a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive 
scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may 
damage the seat's finish.

INSTALL TOILET SEAT 

Install toilet seat in accordance 
with manufacturer's directions.

CARE AND CLEANING

BOLT HEAD

WASHER

BOLT
CAP

NUT & WASHER

LAG

BOLT

TAPERED
WASHERS

FLANGE

FLANGE
BOLTS

THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.

AS AMERICA, INC. ONE YEAR LIMITED WARRANTY

If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is defective in materials or 
workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof of purchase will be 
required—save sales receipt.

This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a 
local building or plumbing contractor to insure local code compliance 
before installation.

This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or 
other damages; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped 
by American Standard.

American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal or installation. IN NO EVENT 
WILL AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED 
TO, TILES, MARBLE, ETC. American Standard will not be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or 
exchange of a defective product, all of which are expressly excluded from this limited warranty. This limited warranty does not cover any liability for consequential or 
incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including 
those of merchantability or fitness for an intended purpose. (Some states or provinces do not allow the exclusion or limitation of implied limited warranties, so this 
exclusion may not apply to you.)

This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this limited 
warranty does not affect such statutory rights.

In the United States:

American Standard Brands

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty 
information may also be obtained by calling 

the following toll free number: (800) 442-1902

www.americanstandard.com

In Canada:

AS Canada, ULC

5900 Avebury Rd.  

Mississauga, Ontario 

Canada L5R 3M3

Toll Free:  (800) 387-0369

www.americanstandard.ca

In Mexico:

American Standard B&K Mexico

S. de R.L. de C.V.
Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

Toll Free: 01-800-839-1200

www.americanstandard.com.mx

BOLT
CAP

Отзывы: