American Standard Enfield 2-PC Elongated Toilet 2860.330 Скачать руководство пользователя страница 3

7 3 0 4 9 8 - 1 0 0

12

13

         ADJUSTMENTS
  

a.

Adjust water level. Water 

level should be adjusted to 
level indicated on tank by 
adjusting float cup.

See Step 11 for water level 

adjustment method

b.

If bowl fails to siphon, an 

adjustment may be 
required with the lift chain.  
Simply remove the bead 
chain from the retainment 
clip (see Fig. 10A) and 
take up slack on the chain, 
and reinsert on lift rod.  
Make sure the chain is not 
too taught.

14

-   3   -

REPAIR PARTS LIST

NOTE: "XXX" represents color or trim finish options. Specify when ordering.

Repair parts are determined by toilet tank number which can be found marked inside tank.

PART NO.

DESCRIPTION

CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth.  
Avoid detergents, disinfectants, or cleaning products in aerosol cans.   NEVER use abrasive scouring powders or 
abrasive pads on your toilet seat.  Some bathroom chemicals and cosmetics may damage the seat's finish.

WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage 
fittings in the tank. This damage can cause leakage and property damage.
American Standard shall not be responsible or liable for any tank fitting damage caused by the use of 
cleaners containing chlorine (calcium hypochlorite).

 

!

TANK
LEVER

"S"
CLIP

LINK

TOP

ARM

NIPPLE

Diagram 1

PARTS FOR WATER
CONNECTION
(SEE STEP 9)

CONE WASHER

VALVE

BODY

WATER LEVEL
ADJUSTMENT

CLIP

FLAPPER

THREADED
SHANK

SHANK
WASHER

COUPLING NUT
(HAND TIGHT ONLY)

FILL

VALVE

FLOAT

CUP

CRITICAL LEVEL

MARK ("C.L.")

MUST BE

1" ABOVE

OVERFLOW PIPE

REFILL
TUBE

ADJUSTABLE
HEIGHT

LOCK NUT

Fig. 10A

11b

With correct washers in place 
(see Step 9a), tighten 
COUPLING NUT 1/4 turn beyond 
hand tight. DO NOT 
OVERTIGHTEN.

Turn on water supply. Adjust 
water to desired level by 
squeezing water level 
adjustment clip and moving 
FLOAT CUP up or down along 
stainless steel link.

738538-YYY0A
4060.295.XXX

735096-406.XXX
3311.028.XXX
034783-XXX0A
738543-0070A
047188-0070A
738541-0070A
7385658.400-0070A
5380.295.XXX
9860.000.XXX

TRIP LEVER
TANK (COMPLETE WITH COUPLING 
    COMPONENTS AND TANK TRIM)
TANK COVER W/ESCUTCHCON
BOWL, ELONGATED
BOLT CAP COVER KIT (INCL 2 COVERS/WASHERS)
FLUSH VALVE
TANK COUPLING KIT
FLAPPER ASSEMBLY
WATER CONTROL
SEAT
WOOD TRIM (TANK)

Содержание Enfield 2-PC Elongated Toilet 2860.330

Страница 1: ... s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c A m e r i c a n S t a n d a r d I n c 2 0 0 2 NOTE Pictures may not exactly define contour of china and components ROUGHING IN DIMENSIONS Thank you for selecting American Standard the benchmark of fine quality for over 100 years To ensure this product is installed properly please read these instructions ...

Страница 2: ...SE CONE WASHER WITH PLASTIC SUPPLY LINE These parts must be used as illustrated to insure water tight connection Use of existing coupling nut may result in water leakage Water supply tube or pipe must extend at least 1 2 inside threaded shank of valve does not apply to flanged tubing Use existing coupling nut and washer Use existing spiral cone washer Fluidmaster cone washer may not seal completel...

Страница 3: ...lcium hypochlorite can seriously damage fittings in the tank This damage can cause leakage and property damage American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine calcium hypochlorite TANK LEVER S CLIP LINK TOP ARM NIPPLE Diagram 1 PARTS FOR WATER CONNECTION SEE STEP 9 CONE WASHER VALVE BODY WATER LEVEL ADJUSTMENT CLIP ...

Страница 4: ...lumber if necessary d Supply pressure too low d Normal supply pressure must be at least 20 psi Toilet leaks a Poor supply line connection a Review Step 9 of installation procedure b Poor bowl to tank floor connection b Review Step 4 through 7 of installation procedure Toilet does not shut off a Flush valve chain too tight holding flush valve open a Readjust chain length as needed Review step 10 b ...

Отзывы: