American Standard Elevate 2947SWT36, Руководство пользователя

Страница: 5 / 36

2
OSB BOARD INSTALLATION
2a. Cut and trim each piece of OSB board (Left and Right) according to the roughin above for the model in-
stalled. Mark and cut out clearance hole for rough plumbing. The OSB is used to provide additional
support for the walls and provide an area to apply adhesive for the wall panels.
2b. Place each piece of OSB board in position according to illustration, keeping it 2” above the shower base
and attach into place using screws (self-drill construction screws are recommended, but standard wood
screws can be used).
TIP:
Mark the location of the top and side of the OSB panels/door support on the
studs to make positioning them easier.
NOTE
: Ensure screw heads are flat to the OSB surface and do not
protrude.
2c. If installing a shower door, provide additional support using a 1x3" keeping it 1-1/4" (31.8 mm) off the deck
of the shower base and screw into corner framing. Chamfer outer edges if necessary. (ref. illustration)
11-3/8"
(289 mm)
11-3/8"
(289 mm)
68-7/8"
(1749 mm)
19-1/4"
(489 mm)
19-1/4"
(489 mm)
32-1/8" (816 mm)
1X3 FROM LEFT WALL FRAMING
32-1/8" (816 mm)
1X3 FROM RIGHT WALL FRAMING
SUB-FLOOR
SUB-FLOOR
1-1/4"(31.8mm)
1x3 SPACING FROM
FIXTURE DECK
LEFT WALL OSB
CUT/LOCATION DIMENSIONS
RIGHT WALL OSB
CUT/LOCATION DIMENSIONS
68-7/8"
(1749 mm)
11-3/8"
(289 mm)
23-7/8"
(606 mm)
70-7/8"
(1800 mm)
22-1/4"
(565 mm)
9-3/4"
(248 mm)
35-1/8" (892 mm)
1X3 FROM LEFT WALL FRAMING
35-1/8" (892 mm)
1X3 FROM RIGHT WALL FRAMING
SUB-FLOOR SUB-FLOOR
1-1/4"(31.8mm)
1x3 SPACING FROM
FIXTURE DECK
LEFT WALL OSB
CUT/LOCATION DIMENSIONS
RIGHT WALL OSB
CUT/LOCATION DIMENSIONS
70-7/8"
(1800 mm)
2" (50.8mm)
FROM
FIXTURE
DECK
2" (50.8mm)
FROM
FIXTURE
DECK
2" (50.8mm)
FROM
FIXTURE
DECK
2" (50.8mm)
FROM
FIXTURE
DECK
OSB Wall Panels Only
Model Right Walls Left Wall
1x3 Door Support,
PINE, not OSB
2947SWT38 20-7/8 " x 68-7/8 " (530 x 1749 mm) 19-1/4 " x 68-7/8 " (489 x 1749 mm) 70-1/2 " (1791 mm)
2947SWT38 23-7/8 " x 70-7/8 " (606 x 1800 mm) 22-1/4 " x 70-7/8 " (565 x 1800 mm) 72-1/2 " (1842 mm)
FOR 36 " CORNER
FOR 38
"
CORNER