INSTALL POP-UP DRAIN
INSTALL BLACK GASKET
3
2
Install BLACK CONE GASKET
(1)
onto DRAIN BODY
(2)
from below.
Note:
The flat side of the BLACK CONE GASKET
(1)
must
face down.
4
Drop DRAIN BODY
(4)
through sink drain
hole. Make sure WHITE FOAM GASKET
(5)
is under flange of DRAIN BODY
(4)
.
Fig. B.
Note:
No plumber’s putty or caulk is required.
The CABLE ATTACHMENT POINT
(6)
must
face towards the rear of the SINK.
Fig. B.
Remove CLEAR PLASTIC COVER
(1)
. Remove
CARDBOARD SPACER
(2)
from under DRAIN
POP-UP
(3)
.
Fig. A.
2
REAR OF
SINK
4
5
6
3
1
SINK
DRAIN
HOLE
FLAT SIDE OF GASKET
MUST FACE DOWN
1
2
Fig. A.
2
1
FLAT SIDE OF
GRAY LOCKNUT
MUST FACE UP
INSTALL GRAY LOCKNUT
5
Install GRAY LOCKNUT
(1)
onto DRAIN BODY
(2)
from below SINK.
Fig. A.
Note:
The flat side of the GRAY LOCKNUT
(1)
must face up.
Tighten firmly by hand. No tools are required.
Check DRAIN FLANGE in SINK to ensure that
WHITE FOAM GASKET
(3)
is fully compressed
and not visible.
Fig. B.
POP-UP KNOB
(1)
must be fully down.
POP-UP KNOB
Fig. A.
Fig. B.
DOWN
3
WHITE FOAM
GASKET
NOT VISIBLE
DRAIN
FLANGE
Fig. B.
2
1
M 9 6 8 8 8 6