- 2 -
FITTING
MOUNTING
DECK
1
3
SPOUT
SHANK
HOT
COLD
2
4
6
5
VALVE
LOCKING
VALVE
LOCKING
M965953 (8/18)
2
VALVE ASSEMBLY
INSTALL HANDLES
3
• Turn VALVE to OFF position.
• Push ADAPTER
(1)
on VALVE STEM
(2)
, so that the hole of the ADAPTER
(1)
without a spline is facing up.
Fig. A.
Tighten STEM SCREW
(3)
to secure ADAPTER
(1)
.
• Align DECK ADAPTER
(5)
to LEVER HANDLE ASSEMBLY
(4)
. Push LEVER HANDLE
ASSEMBLY
(4)
onto DECK ADAPTER
(5)
firmly to flush against mounting surface.
1
4
TOP
SPLINE END DOWN
Fig. A.
FEMALE TEETH
2
3
5
MALE TEETH
• Remove PLASTER GUARDS.
• Thread INSERT
(1)
into SIDE VALVE
(2)
until it touches the
installation surface.
• Thread INSERT
(3)
into SIDE VALVE
(4)
until it touches the
installation surface.
• Tighten COUPLING
(5)
into TEE
(6)
for products without
hand shower.
