M968584
HI-FLOW PULL-OUT
KITCHEN FAUCET
Installation
Instructions
Certified to comply with ANSI A112.18.1M
1
INSTALL FAUCET WITH DECK ESCUTCHEON
(4101.351)
ARCH
ALIGN SLOT
AND TAB
ALIGN SLOT
AND TAB
SLOT
SLOT
TAB
TAB
Assemble RUBBER WASHER
(4)
, BRASS WASHER
(5)
, and threaded LOCKNUT
(6)
onto SHANK
(3)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6)
and check that rotation of HANDLE
(7)
from HOT to COLD
is centered.
Assemble RUBBER WASHER
(4a)
, BRASS WASHER
(5a)
, and threaded LOCKNUT
(6a)
onto SHANK
(10)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6a)
. Use a screwdriver to tighten SCREWS
(8a)
on LOCKNUT
(6a)
the same as fitting installation above.
Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(6)
. Work your way around LOCKNUT
(6)
, tightening the
SCREWS
(8)
slightly each time until all are snug to ensure even pressure.
Align SOAP DISH
(11)
and push into place.
Installation with DECK ESCUTCHEON:
Apply a light bead of plumbers putty to underside of ESCUTCHEON
(1)
if
mounting surface is uneven.
Place ESCUTCHEON
(1)
onto sink or mounting surface with large opening
to the right as shown
.
Insert supply HOSES
(2)
and SHANK
(3)
through ESCUTCHEON
(1)
and mounting surface.
Make sure slot in fitting base aligns with tab on
ESCUTCHEON
(1). Figure 1.
Install SPOUT ASSEMBLY:
Insert HOSE
(9)
and SHANK
(10)
through ESCUTCHEON
(1)
and mounting surface.
Make sure slot in spout base aligns with tab on ESCUTCHEON
(1). Figure 2.
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
RECOMMENDED TOOLS
Adjustable Wrench
Regular Screwdriver
Phillips Screwdriver
Turn off water at
main supply.
CAUTION
Channel Locks
4
1
2
7
3
1
4a
5
5a
9
10
11
6
6a
8
8a
4101.350
4101.351
Figure 1
Figure 2
4101.351
4101.350
