J12
Revised
© 2008 AS America Inc.
ANTIQUITY™
PEDESTAL SINK
VITREOUS CHINA
ANTIQUITY™ PEDESTAL SINK
• Turn-of-the-century detailing on lavatory
and pedestal
• Made from vitreous china
• Rear overflow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
• Design matched to Antiquity toilets
❏
0228.080
Faucet holes on 8" (203mm) centers
(Illustrated)
❏
0224.040
Faucet holes on 4" (102mm) centers
Nominal Dimensions:
610 x 483 x 864mm
(24-1/2" x 19" x 34")
Separate Components:
❏
0228.018
Pedestal top-8" (203mm) centers
❏
0224.014
Pedestal top-4" (102mm) centers
❏
731007-400
Pedestal only
Bowl sizes:
483mm (19") wide
298mm (11-3/4") front to back
140mm (5-1/2") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
356mm
(14)
DRAIN
CHASE
FINISHED
WALL
483mm
(19)
622mm
(24-1/2)
89mm
(3-1/2)
203mm
(8)
203mm
(8)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
264mm
(10-3/8)
REF.
203mm
(8)
203mm
(8)
178mm
(7)
13mm
(1/2") DIA.
HOLES FOR
ANCHOR BOLTS
864mm
(34)
*
578mm
(22-3/4)
*
521mm
(20-1/2)
51mm
(2)
241mm
(9-1/2)
1-1/4 O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
Revised 2/08
