M76
© 2008 AS America Inc.
NOTES:
●
Toilet designed to meet ADA accessibility standards when top of seat height set at
432 to 483mm (17" to 19") from finished floor.
PRODUCT 3355.160 AND 3357.160 SHOWN, 3356.160 AND 3358.160 SAME AS EXCEPT
WITH SLOTTED RIM FOR BED PAN HOLDING.
*
REQUIRES AMERICAN STANDARD KIT 736046-100 TO UPGRADE EXISTING
INSTALLATION OF FLUSHOMETER VALVE AND COMPONENTS.
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING
NOT RECOMMENDED).
SUGGESTED 1/16 CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON
THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR
SUPPLY ROUGHING.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY.
CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of
tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed
for use of superseded or voided pages.
3355.160/3356.160
AFWALL™ ADA RETROFIT
1.6 GPF FLUSHOMETER TOILET
FINISHED WALL
470mm
(18-1/2)
C/L OF SEAT POST
HOLES 140 mm
(5-1/2) CENTER
660mm
(26)
73mm
(2-7/8)
133mm
(5-1/4)
191mm
(7-1/2)
292mm
(11-1/2)
(4) 22mm
(7/8)
HOLES
356mm
(14)
C/L OF
OUTLET
121mm
(4-3/4)
FINISHED
FLOOR
32mm
(1-1/4)
419mm
(16-1/2)
1" N.P.T. OR C.W.T. SUPPLY
AS REQUIRED TO FLUSH VALVE
368mm
(14-1/2)
19mm
(3/4)
133mm
(5-1/4)
83mm
(3-1/4)
62mm
(2-3/8)
1-1/2 SPUD
C/L
229mm
(9)
FINISHED WALL
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm(5-1/2) CENTERS
660mm
(26)
133mm
(5-1/4)
191mm
(7-1/2)
(4)
22mm (7/8)
DIA. HOLES
356mm
(14)
C/L OF
OUTLET
FINISHED
FLOOR
32mm
(1-1/4)
419mm
(16-1/2)
368mm
(14-1/2)
(3/4)
19mm
133mm
(5-1/4)
83mm
(3-1/4)
C/L
229mm
(9)
127mm
(5)
76mm(3) DIA. HOLE IN WALL
FOR 1-1/2 SPUD
62m
m
(2-3/8)
320mm
(12-9/16)
367mm
(14-7/16)
3357.160/3358.160
Revised 11/08
BARRIER FREE
