- 4 -
4
5
2
A.
C.
305mm
Prepare the ground mounting hole
B.
3
Punching
305mm
Ø
10mm
305mm
Install the ground fixture and elbow
Install the elbow at the ground punching position.
305mm
Connect the water supply hose
A. Install the toilet flange on the ground
sewage outlet.
Connect the T-valve to the water supply
angle valve.
C. Remove the toilet and mark the elbow
mounting hole.
B. Place the toilet on the ground and mark along the
bottom edge of the toilet and the ground mounting
hole. (The outer contour line marked in Figure B is
for reference only.)
Use a drill 10mm in diameter to punch a mounting
hole at the marked ground position as per the
dimensions shown in the figure, and pre-embed the
expansion bolt. (The image shown here is only for
reference; The actual product may differ.)
Connect the water supply valve to the water supply hose.
Please use the new bowl water supply hose included,
and it is prohibited to use the old water supply hose.
