ACTICLEAN
™
---------------------------------------------------------------- 1 ----------------------------------------------------------------
Product names listed herein are trademarks of AS America Inc. 7302224-100 (06/16)
© AS America Inc. 2014
FLUSH VALVE ASSEMBLY
P/N: 7381557-400.0070A
•
All trim components including tank-to-bowl
gaskets, washers, nuts, clevis pin, and hair
pin
•
Includes a nut tightening tool
TO REMOVE FLUSH VALVE ASSEMBLY:
• Turn off water supply; flush toilet (remove all
water from the tank)
• Remove tank nuts; do not remove second set
of tank nuts (see
FIGURES 1 and 2
)
• Remove tank from bowl and lay tank on flat
surface on backside to prevent scratching;
no need to remove trip lever
• Remove hair pin and clevis pin from the RED
trip lever arm (see
FIGURE 3
)
;
this frees the
yoke from the red arm
• Remove hair pin and clevis pin from the
BLACK trip lever arm (see
FIGURE 3
)
;
this
frees the bead chain from the black arm
•
Pull the refill tube from the overflow funnel
connection
•
Grab and remove tank to bowl gaskets from
the underside of the tank
•
Take the included tool and remove tank to
bowl nut by turning
counterclockwise
•
Remove friction washer
•
Remove flush valve assembly from the
inside through the top of the tank
FIGURE 1
FIGURE 2
FIGURE 3