12-5045-10
Numbers in [brackets] are for 50 Hz international systems.
7
User’s Information
2. Once vacuuming is completed on one side of the
COLLECTION CELL, turn the COLLECTION CELL
over and repeat on the other side of the COLLEC-
TION CELL.
NOTE: It is normal for COLLECTION CELLS to
discolor during operation. Vacuuming will not
restore the COLLECTION CELLS to their original
color. However, vacuuming does restore the
COLLECTION CELLS to a high efficiency.
REPLACING THE PRE-FILTER AND COLLECTION
CELLS INTO THE AIR CLEANER
1. Replace the PRE-FILTER into the air cleaner.
Ensure that the "AIRFLOW indicator arrow" on the
PREFILTER is pointing in the same direction as the
"AIRFLOW indicator arrow" on the air cleaner cabi-
net.
2. Reinstall the COLLECTION CELLS into the air
cleaner. Ensure the handles on both of the COL-
LECTION CELLS are folded flat.
Handles Fold
Flat
3. Replace the power door onto the air cleaner.
To install the door, follow the instructions in Figures
11 - 14 below.
1. Using a vacuum hose, vacuum in even strokes
across the entire COLLECTION CELL surface.
Vacuum using even strokes in one direction, then
repeat the process using even strokes in the oppo-
site direction, as demonstrated in Figure 8 below.
Fig. 10
Fig. 8
Fig. 9
Fig. 12
Insert tabs into cabinet slots. Edge of door should fit into
channel against gasket. (See detail)
Gasket
Hold door so that tabs are aligned with slots in cabinet.
Fig. 11
