American Sportworks CW-413, Руководство оператора

Страница: 4 / 105

4
Introduction
The Brush Guard Bar also provides a mounting system
for American SportWorks optional windshields, canopy
tops and weather enclosures. It also serves as a
mounting base for many other optional cargo racks, gun
and bow racks.
The cargo bed is for transporting accessories such as
camping equipment, tree stands, hunting gear, and
fishing gear. A standard hitch mounting plate enables
quick installation of a rear hitch for pulling small trailers
full of supplies, tools, gear, and game.
The Utility Vehicle has some similarities to an ATV. Like
an ATV the Utility Vehicle has a short wheelbase,
narrow stance, and high center clearance all which
provide for narrow and difficult trail access. This
combination of short wheelbase and narrow stance also
enables this vehicle to be loaded in the back of most full
to mid-sized pickups for transport.
The Utility Vehicle’s ground compaction and is very
gentle on the ground and surrounding vegetation. The
highly energized four wheeled independent suspension
system provides an incredibly soft ride and outstanding
stability over difficult terrain. The engine is EPA certified
and meets California Air Resources Board (CARB)
certification standards.
Owner Assistance
The safety information should be viewed by the owner
and the Warranty Registration card should be filled out
by the dealer at the time of purchase. The owner, upon
purchasing the vehicle, should have participated in a
short drivers training course with the dealer. This
information is necessary to provide you with quality
customer service.
The parts on your Utility Vehicle have been specially
designed and should only be replaced with genuine
American SportWorks parts.
If customer service or repair parts are required contact a
American SportWorks dealer. They have trained
personnel, genuine repair parts and equipment specially
designed to repair American SportWorks products.
American SportWorks LLC
P.O. Box 649
Roseland, LA 70456
Toll Free PH: 1-866-646-5278
Fax: 1-866-329-5278
service@amsportworks.com
Always use the serial and model number when ordering
parts for your Utility Vehicle. The serial-number plate is
located under the cargo bed on the driver’s side just
above the engine, on the frame as shown in figure 1
below.
Serial Number Plate Location
Figure 1
Record your Utility Vehicle serial number here for quick
reference:
Model Number:___________________________
Serial Number:____________________________
Your American SportWorks dealer wants you to be
satisfied with your new vehicle. If you do not understand
any part of this manual or you’re not satisfied with the
service received, please take the following actions.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems so
they can assist you.
If you are still unsatisfied, seek out the owner or general
manager of the dealership.
For further assistance write to