5
1. Select a location for the base:
• Choose a flat, level, water-resistant surface that is non-metallic and is in a
spot that has good air circulation. An inside wall near and electrical outlet is
often convenient.
• The humidifier should be placed where the cord will not present a tripping
hazard.
• It should be out of the reach of children.
• Leave at least 36 inches (90cm) between the [front] of the humidifier and
any walls or furnishings.
• Be sure air intake and exhaust vents are not blocked.
Poor air flow could result in poor performance, moisture
damage, and/or the build-up of mildew and other micro-
organisms.
. Position the tank on the base:
• Turn the tank over; hold it by the carry handle, and set it in
place on the base.
• Carefully align the cap with the receptacle in the water
tray; if necessary move the tank slightly until you can feel
that it is properly seated.
• Some water will flow out of the tank and into the water tray.
Important:
• Always be certain the tank cap is locked before turning the water tank over.
• Once the humidifier has been filled, do not tilt or move it. To reposition the
humidifier, remove the water tank, and unplug it first.
• Never pour water into the air intake or exhaust vents.
NEVER USE THE HUMIDIFIER WITHOUT THE FILTER IN PLACE.
3. Once the water tank is in place, plug the cord into a wall
socket.
Note:
To reduce electrical interference, do not plug into the same
outlet as TVs, baby monitors or cordless phones.
4. Turn the fan speed dial clockwise to turn the unit on and to
increase humidity more quickly (setting number ). Turn it
counterclockwise to increase humidity more gradually, (setting
number 1) and for quieter operation, especially at night.
The power indicator will light when the humidifier is on.
Important:
• Refill the tank as needed to maintain adequate water level.
• Never allow the humidifier to remain on when the tank is empty.
• To prolong filter life, turn the filter over each time you fill the water tank.
• Replace the filter when it displays any stains or becomes stiff and non-
absorbent.
Reminder:
Turn off and then unplug unit before cleaning.
To Use
2
1
0
2
1
0
2
1
0
2
1
0
2
1
0