manualshive.com logo in svg

American Range M-1, Руководство пользователя

Поделиться
Скачать
American Range M-1 Скачать руководство пользователя страница 6

Important - 

The installation of this appliance must conform to local codes or, in the absence of local codes, with the National Fuel 

Gas Code ANSI Z223.1 Natural Gas Installation Code, CAN/CGA-B149-1 or the Propane Installation Code, CAN/CGA-B149-2 

as applicable, including:

1.  The appliance and its individual shut off valve must be disconnected from the gas supply piping system during any 

  pressure testing of that system at test pressure in excess of 1/2 psi (3.45 kPa). 

2.  The appliance must be isolated from the gas supply piping system by closing the individual manual shut off 

  valve during any pressure testing of the gas supply piping system.

The appliance, when installed, must be wired and electrically grounded in accordance with local codes, or in the absence of local 

codes, with the National Electric Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2 as applicable.

Installation, Operation and Service Personnel - 

Installation of the equipment should be performed by qualified, certified, licensed 

and/or authorized personnel who are experienced in state/local installation codes.

Operation of the equipment should be performed by qualified or authorized personnel who have read and understand this manual 

and are familiar with the functions of the equipment.

Service of the equipment should be performed by qualified and licensed service personnel who are knowledgeable with American 

Range products.

Installation - Gas Standards and Codes 

1.  A manual gas shut off valve must be installed in the gas supply (service) line ahead of the appliance and gas pressure regulator  

     in the gas stream for safety and ease of future maintenance/service.

2.  The gas pressure regulator supplied with the appliance must be installed prior to connecting the equipment to the gas supply  

  line.  Failure to install a regulator will void the equipment warranty and result in a potentially hazardous condition.

3.  Contact factory for installation, maintenance and repairs, American Range Customer Service at www.americanrange.com 

  or 818.897.0808.

13592 Desmond St., Pacoima, CA 91331   818.897.0808 tel  888.753.9898 toll free   www.americanrange.com

2

 Majestic Convection Oven

Owner’s Manual

DANGER

!

Содержание M-1


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды