13592 Desmond St., Pacoima, CA 91331 - 818.897.0808 - 888.753.9898 - www.americanrange.com
MAINTENANCE
REMOVING THE OVEN DOOR
CHEF (DROP DOWN) DOOR
STEP 1
Open the oven door completely. The left door hinge is equipped with a slow
closing lever. The lever should be pushed down to release the hinge clip.
Push Lever Down And In
Slow Closing Lever
Hinge Clip
STEP 2
Rotate the hinge clip towards you until it completely stops. Repeat on the right
door hinge.
STEP 3
Slowly close the door until the left and right door hinge bodies are engaged
with the hinge clips and door tops momentarily.
Hinge Body
Hinge Clip
STEP 4
Continue to close the door and you will feel a slight lift. Hold the door firmly
along the sides and lift slowly until the left and right door hinge arm unhooks
from the hinge receivers. Pull the door away from the oven.
Hinge Arm
Hinge Receiver
TO REPLACE DOOR
Refer to steps above [reversely].
1. Holding the door firmly on both sides, slowly move the door towards the hinge receiver opening and hook the hinge arms into the hinge receivers. Check for
alignment. DO NOT move the hinge clips until the hinge arm is properly seated into the hinge receivers.
2. Open the door completely.
3. Push levers towards the oven until stop.
4. Close door. Observe that the door will close slowly at the top end.
