American Printing House Mantis Q40, Руководство по началу работы

Страница: 6 / 12

Connect the USB-C end of the USB cable to the USB-C port
located on the left edge of your Mantis. Very little effort is
required, and forcing the connection can damage the cable or
the device.
Connect the other end of the USB cable to the power adapter,
then plug the adapter into a power outlet. The USB connector
and power adapter are included with your Mantis. Use the
provided power adapter for optimal recharge.
Powering On and Off
If your device is charged, press and hold the Power button
on the left edge of the device for approximately 2 seconds to
turn on your Mantis.
“Starting” should appear on the braille display with a tactile
loading animation that circles during start-up. After a few
seconds, loading is complete. The “Editor” application is
shown as selected on the braille display. Your Mantis is now
ready for use.
To turn the device off, press and hold the Power button for 2
seconds.
Navigating Menus
To navigate from item to item in menus, press the Previous
(leftmost) and Next (rightmost) thumb keys, located on
the front edge of your device. You may also use the Up and
Down Arrow keys on the QWERTY keyboard. As you press
the Previous and Next thumb keys, the menu item changes
on the braille display. Each item represents an application or
option you can activate.
To activate a menu item, press one of the Cursor Routing
keys. You can also press the
Enter key on the keyboard to
activate a menu item.