•
Put together three squares across to make a row.
•
Make another row across using three squares. You should have made two rows.
•
Take the single square and connect the top of the square to the bottom of the middle square of
one of the rows.
•
Join the bottom of the single square to the top of the middle square on the second row.
•
Go to the upper right corner square of the maze. Place a tunnel in an up and down line on the
middle of the square.
•
From the upper right corner square, move one square to the left and one square down. This
should be the single square that connects the two rows together.
•
Place a tunnel over the gap that is between the single square and the bottom row of squares.
Make sure the tunnel goes across the square.
•
This single square is also Colby the Mouse’s starting square.
•
From the starting square, move one square up.
•
Now move one square to the left. This square is where the piece of cheese goes.
•
Return to Colby the Mouse’s starting square, which is the single square connecting the two
rows.
•
Make sure Colby is on the square and his nose is pointing down.
•
Colby the Mouse can now be programmed to find the piece of cheese.
CARD 17
•
Card 17 needs a total of 15 squares.
•
Ten wall pieces are needed for the maze.
•
Make a long row across using five squares.
•
Make another long row across using five squares.
•
Build a small row using three squares.
•
Connect the bottom of the small three-square row to the top of a long five-square row.
•
Make sure the three-square row is attached to the middle of the long row. The squares on the
left end and the right end of the long row should be sticking out.
•
With the other long row, start at the far-right square and move one square to the left.
•
Connect a single square to the top of the square you moved to.
•
Now move two more squares to the left and connect a single square to the top of that square.
•
Join the tops of the single squares to the bottom of the other long row.
•
Make sure the single squares are attached in the middle of the long row so the right end and
the left end of the long row are sticking out.
•
Move all the way down to the lower right corner square of the maze.
•
Now move one square to the left. Place two wall pieces into the gap on the right side of the
square. This is also Colby the Mouse’s starting square. He can be placed on the starting square
with his nose pointing up.
•
Move two more squares to the left. Once on that square, put two walls in the gap on the right
side of the square. This also the square where the cheese goes.
•
From that square, move up two squares. Place two walls on the left side of the square.
•
Move up one more square. This is where the Action symbol will go.
•
When Colby the Mouse gets to the square with the Action symbol, the Red Action Button on his
back needs to be pressed.
•
Go to the next square on the right. Put two walls in the gap at the bottom of the square.
•
Move one more square to the right and then move one square down.
•
Put two wall pieces in the gap on the right side of the square.
•
Move two squares down to Colby the Mouse’s starting square.
•
If Colby the Mouse has been moved from his starting square, please return him and make sure
his nose is pointing up.
•
Colby the Mouse can now be programmed to find the piece of cheese.
CARD 18
•
Card 18 needs a total of 15 squares.
