Press Menu and select Bookshare from the menu that appears.
When Library starts, it shows a list of initial options that include the following:
Recent Titles
Authors
Titles
To resume reading a previously opened title, pick Recent Titles. Library shows the most recent title at
the top of the list followed by other recent titles. Use the arrows to highlight the title of interest, and then
press Select to open it and resume where you left off.
For a list of authors, pick Authors.
For a list of all titles, pick Titles.
When you pick one of these options, Library shows a list. If you selected authors, it shows a list of
authors. Otherwise, it shows a list of titles. To get to the Titles list from the Authors list, select an
Author--Library shows all the titles written by that author.
To start reading, select one of the titles in the list. Library starts the Reader app with the book and starts
reading. To pause reading, press Select. To resume, press Select again.
To stop reading and return to the Title list, press the Back key.
While reading, use the following commands to navigate:
To move to the previous or next heading, use Space+dots 1-2-6 and Space+dots 3-4-5. These commands
default to moving to the heading with the least movement, so if a title had headings at levels one, two,
and three, the heading navigation commands move by heading three levels. Note that when moving by
level three, heading levels one and two are included.
To change the heading level by which to navigate, press Space+dots 2-3-5-6. Reader responds by
announcing the current level movement level, three in this example. Pressing the change level command
again moves to level two headings, and yet another press changes the movement to level one. Continue
pressing the Change Level command to return to level three heading movement. Once you set the
heading level, the previous and next heading commands move by the selected level.
For titles that are text based, use the normal text editing commands to navigate.
For titles that are audio based, use these commands:
To move back or forward by 10 seconds, use the next or previous paragraph command.
To move 10 minutes or, if the Daisy title has pages marked, by pages, use the previous and next page
commands. Previous page is Space+dots 1-2-3-4-5. Next page is Space+dots 1-2-4-5-6.
To increase or decrease the playback rate of audio, use Up Arrow or Down Arrow.
http://tech.aph.org/plus_doc.htm
