American Megatrends Apollo III PCI Pentium Скачать руководство пользователя | Manualshive

Страница: 73 / 74

background image

Index

69

Item

Description

Expansion slots

Three ISA expansion slots
Four PCI expansion slots

L1 internal cache

memory

The Intel Pentium has 8 KB data cache and 8 KB
instruction cache.

L2 secondary

cache memory

256 KB or 512 KB of synchronous PBSRAM, direct-
mapped, write-back.

Cache memory

/system memory

256 KB caches up to 128 MB of system memory
512 KB caches up to 512 MB of system memory

Type of System

Memory

Up to 512 MB mounted on the motherboard in two
banks of 72-pin 4 MB, 8 MB, 16 MB, or 32 MB
SIMMs.

System memory

Fast page mode or Extended Data Out (EDO) SIMMs
operating at 70 ns.

Memory buffer

One level posted write memory buffer

Max. system

memory

128 MB

Fast ATA

Supports the Fast ATA specification using PIO mode 4
and multiword DMA mode 2.

System BIOS

This motherboard has a 128 KB AMIBIOS system
BIOS on a Flash ROM with built-in WINBIOS Setup.

BIOS shadowing

The system BIOS is always copied from ROM to RAM
for faster execution. The end user can shadow 16 KB
ROM segments from C000h – DCFFFh.

AMIBIOS

features

IDE block mode support,
IDE 32-bit data transfer support,
IDE Programmed I/O mode 0, 1, 2, 3, and 4 support,
IDE LBA mode support,
APM (Advanced Power Management) and Flash BIOS
hooks,
EPA Green PC-compliant,
PCI and Plug and Play (PnP) support, and
DIM (Device Initialization Manager) support,
DMI (Desktop Management Interface) support,
ATAPI support,
can boot from a CD-ROM drive,
automatically detects system memory, cache memory,
and IDE drive parameters,
Intel NSP-compliant,
Fast ATA IDE mode programming,
Boot sector virus protection,
instant-on support,
automatically configures PnP and PCI devices.

IDE

Provides two 40-pin IDE connectors onboard that
support up to four IDE drives. IDE controller is on the
PCI local bus.

Floppy

Onboard support for up to two 360 KB, 720 KB, 1.2
MB, 1.44 MB, or 2.88 MB floppy drives.

Parallel port

Onboard ECP and EPP-capable parallel port connector.

Serial ports

Two onboard serial port connectors. Two 16550 UART
serial ports.

Keyboard

Includes a standard miniDIN keyboard connectors.

USB

Two USB connectors are provided on the motherboard.

Infrared

An infrared connector is provided on the motherboard

Mouse

Includes a 10-pin berg mouse connector.

Power supply

Includes three power supply connectors.

Real time clock/

CMOS RAM

A real time clock and 128 bytes of CMOS RAM with a
battery backup is provided on the motherboard.

«
...
71
72
73
74
»

Содержание Apollo III PCI Pentium











































































Отзывы:

Нет отзывов

Похожие инструкции для Apollo III PCI Pentium

Бренд: Lantronix Страницы: 8

Бренд: Gan Systems Страницы: 24

DCDC SBC Series

Бренд: Infineon Страницы: 17

Бренд: Xeltek Страницы: 19

Бренд: Biostar Страницы: 49

Бренд: Gigabyte Страницы: 40

Бренд: PC Partner Страницы: 20

Бренд: Quick Страницы: 24

Бренд: ST Страницы: 77

Бренд: C&T Solution Страницы: 84

Бренд: Microsemi Страницы: 15

Бренд: Tews Technologies Страницы: 26

Бренд: DFI Страницы: 130

P55 GD80 - Motherboard - ATX

Бренд: MSI Страницы: 150

VIOTECH 3100 PLUS - BIOS

Бренд: Biostar Страницы: 41

Бренд: OLIMEX Страницы: 13

Бренд: ASROCK Страницы: 18

Бренд: Texas Instruments Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды