Chapter 4 AMIBIOS Setup
4 8
4 8
H a r d D i s k F o r m a t U t i l i t y ,
H a r d D i s k F o r m a t U t i l i t y ,
Continued
Answer the questions on the screen. The first two questions are already completed if only one hard disk drive was selected in
Standard CMOS Setup and the cursor is on
Interleave
. The Disk Drive Type is read from CMOS RAM. The interleave factor can be
selected manually or determined by the Auto Interleave routine.
The hard disk drive manufacturer usually provides a list of bad tracks. Enter these tracks. They are then labeled as bad to prevent data
from being stored on them. The following screen is displayed after entering
Y
in Mark Bad Tracks, pressing <Enter>, and selecting
add, delete, revise, or clear from the Bad Track Edit Menu.
Type
Y
and press <Enter>. A warning screen appears. Press any key to continue.
press <Enter> to return the main Hard Disk Utility screen.To proceed,type Y and press <Enter>.
Warning
Data on the hard drive will be irrevocably lost.
