Commercial Grade Ro pe Lig ht Kit
HOW TO EXTEND ROPELIGHT
NOTE: Do not exceed 150’ maximum run distance when linking
extension segments together.
1. Turn the plastic end cap counter-clockwise to remove from the first
rope light.
2. Remove power cord from the second piece of rope light.
3. Connect both ends of the ropes (the male and female halves plug
into each other). Make sure all connectors are firmly tightened
and secured. See Figure 2.
4. Repeat steps 1, 2 and 3 for any additional extensions.
5. Turn the plastic end cap clockwise until it is firmly tightened and
secured on the last rope light.
HOW TO INS TALL ROPE LIGHT
1. Attach mounting clips with nails or screws onto wooden surfaces. Be sure that it is machanically sound.
See Figure 3.
2. Mounting clips should be evenly spaced and be a maximum of 12” apart.
3. Make sure that the distance between two lines of lighting chains are at least 1/2" apart.
4. Gently press rope light into track or clips so that it snaps into place.
PROP 65 WARNING
Handling the coated electrical wires of this product exposes you to lead, a chemical
known to the State of California to cause cancer, birth defects and other reproductive
harm. Wash hands a fter us e.
Figure 3
Figure 2
www.americanlighting.com
s
p
il
c
g
n
it
n
u
o
m
g
n
i
h
c
a
t
t
A
s
n
o
it
c
e
S
g
n
it
c
e
n
n
o
c
r
e
t
n
I
RV1731
Installation intructions for CL-CSA Series
