PARTS REQUIRED
8pcs -
H2
Hex Head Bolt
8pcs -
H4
M8 Lock Washer
8pcs -
H3
M8 Flat Washer
2pcs -
P2
Leg Base
Attach the
P2
Leg Base onto the
P3
Middle Leg and
P5
Bottom
Leg using the
H2
Hex Head Bolts,
H3
Flat Washers and
H4
Lock
Washers as shown in
FIGURE 3.
FIGURE 3
©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
6
All Rights Reserved.
H2
H4
H3
P5
P5
P2
H2
H4
H3
P3
P3
P2
H2
H4
H3
H2
H4
H3
THIS STEP REQUIRES FOUR OR MORE ADULTS.
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
STEP 3
All edges must be
assembled “FLUSH”
with each other.
Tighten all leg bolts now using the T1
Socket Head Wrench-tight.
