1. Using a soft tool unsnap and remove the panel surrounding the radio,
including the air vents..
2. From the OEM radio brackets remove (4) 10mm bolts. Remove Radio.
Unplug all harnesses and antenna connections.
DASH DISASSEMBLY INSTRUCTIONS
DOUBLE DIN INSTALLATION INSTRUCTIONS
2
3
Fig B
Fig A
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)
KIT ASSEMBLY INSTRUCTIONS
1. Insert pocket into lower section of the brackets and snap into rear pocket
support tabs.
2. Install brackets to rear of main frame using the (6) screws provided.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
4. Using the main frame of the as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
NOTE:
Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
Single ISO Mount Applications
Double DIN Mount Applications
See Fig B for bracket tab removal.
1. Install brackets to rear of main frame using the (6) screws provided.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to
sides of radio using screws provided with radio when possible,
or screws supplied with kit.
3. Using the main frame of the as a guide, slide radio forward or backward
for desired look and then tighten screws to the radio.
NOTE:
Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio. Suggested.
You will only use one main frame.
For models with the 7" screen use
the TOYK974 for models with the
6" screen use the TOYK971.
You will only use one main frame.
For models with the 7" screen use
the TOYK974 for models with the
6" screen use the TOYK971.
