2
Interrupters User Guide
8
Chapter 2:
GPS300 Installation
The GPS300 interrupter consumes approximately 120mA. Relay current consumption is additional,
which is typically less than 10mA for a solid state relay and could be as high as 400mA for a
mechanical mercury relay.
The GPS300 installation process includes the following steps:
l
Installing the GPS300 Interrupter on page 8
l
Setting Display Contrast on page 12
l
l
Running a Test Program on page 13
Installing the GPS300 Interrupter
When completing the following procedure, refer to
Supplied Power Cables and GPS Antenna on page
for input and output voltage specifications.
WARNING:
Make sure to follow all precautions when working with the interrupter and high
voltage circuits.
WARNING:
Do not connect the GPS300 to
primary
power.
The installation process includes the following steps. Refer to the individual sections for each step
for the complete instructions.
l
Determining a Power Source on page 8
l
l
Connecting the GPS Antenna on page 11
Determining a Power Source
Determine how to power the MicroMax interrupter using one of these possible sources:
Содержание MicroMax GPS360
Страница 1: ...Proven compliance solutions Relentless service Interrupters User Guide Interrupters User Guide...
Страница 5: ...Interrupters User Guide v Appendix E Regulatory Notices 63 Export Control Classification Number 63...
Страница 60: ...Interrupters User Guide Chapter 5 Interrupter Programming 55 The configuration is now complete...
