Part No. 122207-000, Rev. 1
January 2017
4 of 4
MicroMax GPS350 Quick Reference Guide
Program MicroMax GPS350
5
9
Close and lock the clear cover on the MicroMax GPS350. Place interrupter inside the rectifier.
a
Press
to
select interruption schedule - Daily,
Continuous, or Start/Stop.
b
Use
and
to move through fields; use
keypad to change settings.
c
Press
to begin program.
6
For
Interruption
, enter a number between 1 and 9
for the program number.
1
Power on the rectifier.
2
Press to view GPS information.
3
Use
and
to change display contrast.
4
OPTIONAL:
From the main menu, press to
run Test Mode. Press
to return to main menu.
5
Press to set up an
Interruption
program
OR
to set up an
Interference
program.
MicroMax GPS350 Main Menu
12:01:03 02/25
1:Interrupt 2:GPS
3:Interference
4:Options :Test
Interruption Program
# 5 On 12.0 Off 03.0
Start 06:00 01/01/14
Stop 18:00 12/31/99
Change: / Set:
#10 On 13.0 Off 05.0
Delay 002.0
Cycle Time 0088s
Unit #07/10 Next:
Interference Program
8
For
Interference
:
a
Use
and
to move through fields. Use
keypad to change settings.
b
Press
to select type of interruption.
c
Press
to
select interruption schedule - Daily,
Continuous, or Start/Stop.
d
Use
and
to move through fields. Use
keypad to change settings.
e
Press
to begin program.
a
Press
to access a list of
Options
and then
to view or edit
Switch
and
Int. Cycle
options.
b
To change settings, move the cursor to the option
and press .
7
For
Interruption Output Parameters
:
Switch: Norm Closed
Int. Cycle: ON/OFF
Move: Change:
Done: Cancel:PREV
Out Parameters
The following procedures are general steps for programming the GPS350 using the unit keypad. For instructions
on programming the unit with Bullhorn Tools, refer to the online help available from the Bullhorn Tools
Help
menu or to the
MicroMax Interrupters User Guide
.
