American Heritage Billiards QUEST 8' BILLIARD TABLE Скачать руководство пользователя страница 3

Страница: 3 / 6

With a level or straight edge, be sure that the slate seams are flat and level. If adjustments

need to be made, loosen slate screws and place a shim(s) in area that needs adjustment.

Tighten screws and check for levelness. Use Bee’s Wax or similar to fuse the seams of the

slate together.

Remove any wax, dust and debris from the slate surface to prep it for the bedcloth. Layout

bedcloth centering it over the slate surface. Starting at one end, staple cloth to slate framing

working from center out toward the pockets stretch cloth toward pockets. Go to opposite end

of table and repeat process but pull the cloth tight while stapling. Repeat on long sides

working from center between center pocket and end pocket stretching cloth toward the

pockets as you staple. Once cloth is completely stapled, cut pocket openings by cutting small

vertical incisions in cloth to relax the fabric so it can be stretched and stapled around

opening. Finally, make “X” style slits in cloth where rail bolts will go through the slate holes

(see photo below).

Содержание QUEST 8' BILLIARD TABLE

Страница 1: ...QUEST 8 BILLIARD TABLE ...

Страница 4: ...on the rails measuring the overhang on each end Make sure the center pocket opening seam is tight Secure long side blind to cleats using provided screws Be absolutely sure to use only the enclosed blind screws when securing the blinds to each rail incorrect screw length will cause permanent damage to all blinds ...

Страница 6: ... 16 Insert the Pocket through the underside of the rail and pull the pocket all the way back towards the outside of the Table Make sure the front of the pocket lines up with the felt on the rails INCORRECT WAY CORRECT WAY ...