American Hearth CHARLESTON ALS-16CR1-1, Инструкция по установке и руководство пользователя

Страница: 4 / 16

21780-2-0210 Page 4
%HIRUH\RXEHJLQ'RQRWKDQGOHWKHVHORJVZLWK\RXUEDUHKDQGV
$OZD\VZHDUJORYHVWRSUHYHQWVNLQLUULWDWLRQ$IWHUKDQGOLQJORJV
wash your hands gently with soap and water.
All Logs
The positioning of the logs is critical to the safe and clean operation
of this heater. Sooting and other problems may result if the logs are
QRWSURSHUO\DQG¿UPO\SRVLWLRQHGLQWKHDSSOLDQFH
Refer to Figures 1 and 2 for the following warning.
Warning: Failure to position the parts in accordance with
WKLVGLDJUDPRUIDLOXUHWRXVHRQO\SDUWVVSHFL¿FDOO\DSSURYHG
with this appliance may result in property damage or personal
injury.
PROPER INSTALLATION SEQUENCE:
ALS-16CR1 (Figure 1)
3ODFH EDFN ULJKW ORJ RQWR ULJKW UHDU SLQ RQ UHDU ORJ
support.
3ODFHEDFNOHIWORJRQWROHIWUHDUSLQRQUHDUORJVXSSRUW
3ODFHIURQWULJKWORJRQWRWZRULJKWIURQWSLQVRQEXUQHU
pan.
3ODFHIURQWOHIWORJRQWRWZROHIWIURQWSLQVRQEXUQHU
pan.
5. Place boss on top left (#5) log into recess on back left (#2)
log.
6. Insert boss on top right (#6) log into groove on back right (#1)
log.
7. Compare the completed log installation with the appropriate
photo from pages 3 through 6. Review previous steps to make
any necessary adjustments.
8. Log placement is completed.
Attention: Do not use Figure 1 to order replacement logs. Refer to
3DJH3DUWV/LVWDQG3DUWV9LHZWRRUGHUORJVIRU\RXUDSSURSULDWH
model number.
PROPER INSTALLATION SEQUENCE:
ALS-(18, 24, 30)CR1 (Figure 2)
3ODFH EDFN OHIW ORJ RQWR OHIW UHDU SLQ RQ UHDU ORJ
support.
3ODFH EDFN ULJKW ORJ RQWR ULJKW UHDU SLQ RQ UHDU ORJ
support.
3ODFH IURQW ULJKW ORJ RQWR WZR ULJKW IURQW SLQV RQ
burner pan.
3ODFHIURQWOHIWORJRQWRWZROHIWIURQWSLQVRQEXUQHU
pan.
5. Place boss on top left (#5) log into recess on back left (#1)
log.
6. Insert boss on top right (#6) log into groove on back right (#2)
log.
7. Compare the completed log installation with the appropriate
photo from pages 3 through 6. Review previous steps to make
any necessary adjustments.
8. Log placement is completed.
Attention: Do not use Figure 2 to order replacement logs. Refer to
3DJH3DUWV/LVWDQG3DUWV9LHZWRRUGHUORJVIRU\RXUDSSURSULDWH
model number.
LOG PLACEMENT
PROPER INSTALLATION SEQUENCE
ALS-(18,24,30)CR1S-1 (Figure 3
3ODFH EDFN ULJKW ORJ RQWR ULJKW UHDU SLQ RQ UHDU ORJ
support.
3ODFHEDFNOHIWORJRQWROHIWUHDUSLQRQUHDUORJVXSSRUW
3ODFHIURQWULJKWORJRQWRWZRULJKWIURQWSLQVRQEXUQHU
pan.
3ODFHIURQWOHIWORJRQWRWZROHIWIURQWSLQVRQEXUQHU
pan.
5. Place boss of left middle log (A) into recess on back left (1)
log.
6. Insert boss of center middle log (B) into groove on back right
(2) log.
7. Place right middle log (D) onto right back log (2) and front right
log (3).
8. Place top right branch (E) to round boss on right middle log
(D) and square boss on center middle log (B).
Note: Assembly of ALS-18CR1S-1 logset is complete.
$/6&56ORJVHWVVKRXOGFRQWLQXHWKURXJKVWHS
9. Place top left branch (F) on top of center middle log (B) resting
RQEDFNRIWRSULJKWEUDQFK(DQGIDUOHIW¿QJHURIWRSOHIW
branch (F) under back of left middle log (A).
Attention: Do not use Figure 3 to order replacement logs. Refer to
3DJH3DUWV/LVWDQG3DUWV9LHZWRRUGHUORJVIRU\RXUDSSURSULDWH
model number.
Apply loose material (glowing embers) per appropriate Installation
Instructions and Owner's Manual. Replacement of loose material
(glowing embers) must be purchased from American Hearth
6\VWHPV,QF$SSOLFDWLRQRIH[FHVVORRVHPDWHULDOJORZLQJHPEHUV
PD\DGYHUVHO\DIIHFWSHUIRUPDQFHRIWKHKHDWHU:$51,1*$OO
previously applied loose material must be removed prior to
reapplication.