7
VIDEO INPUT / OUTPUT CONNECTIONS
Video input and output connections are located on the rear of the 980C-xxxx series units. A
BNC connector is provided for each channel. The video inputs are connected to an appropriate
75
baseband video source such as a camera or a video recorder output. The 75
video
outputs can be looped through typical baseband video inputs of switchers, recorders and other
equipment as required. For proper operation, the outputs must be terminated with 75
. For
optimum performance the video cables should be the shortest length of coax practical.
The location of a video input to the RT-96400C-SL will be mirrored as a video output at the RR-
96400C-SL. For example, the Channel 2 video input on the RT-980C-1550 will become the
Channel 2 video output on the RR-980C-1550 after traveling across the fiber infrastructure.
RT-980C-XXXX SERIES STATUS INDICATORS
Each of the RT-980C-XXXX series transmitters provides the following front panel LED status
indicators to aid in installation and troubleshooting:
VIDEO 1 THROUGH VIDEO 8
A bi-color LED indicator is provided for the each of the eight video inputs to the RT-980C-XXXX
series transmitters. Video status associated with each of these LED’s is summarized below.
Video Presence LED
Video Status
Green
Proper Input Video Present
Red
Input Video Not Detected
