3
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek Series 8229C multimode two channel video
multiplexer with return AD/Bosch Manchester control and bi-directional contact closure. Please
take a few minutes to read these installation instructions in order to obtain the maximum
performance from this product.
FUNCTIONAL DESCRIPTION
The 8229C Series units operate as a transmitter / receiver pair for the transmission of two
simultaneous, real time baseband NTSC / PAL video signals with return Manchester control and
contact closure over one multimode fiber optic cable.
The MTX-8229C transmitter accepts up to two video inputs and multiplexes these signals along
with the data signals onto a single optical output port for connection to the fiber transmission
system. Correspondingly, the MRX-8229C receiver converts the optical signal to two
independent video output signals along with the data signals.
This link can accommodate both a return Manchester data interface and a bi-directional contact
closure interface. These interfaces function independent of each other and can be used
individually or concurrently.
The 8229C Series units operate on 50 um or 62.5 um multimode fiber. Refer to the data sheets
for detailed performance specifications.
The individual units may be configured for rack mounting or wall mounting depending upon the
position of the included mounting hardware.
INSTALLATION
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.
To install the MTX-8229C or MRX-8229C it is first necessary to mount the rack flanges to the
unit.
For rack mounting the ears are installed on the
sides of the unit with the surfaces that have
oval holes flush with the front of the unit as in
Figure 1. Mount the ears with the #10 flathead
screws provided. To mount in the rack cabinet,
use mounting screws that are appropriate for
the rack cabinet being used.