4
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek Series 860 multimode six channel
video multiplexer. Please take a few minutes to read these installation instructions in
order to obtain the maximum performance from this product.
FUNCTIONAL DESCRIPTION
The 860 Series units operate as a transmitter / receiver pair for the transmission of six
simultaneous, real time baseband NTSC/PAL video signals over a single multimode
fiber optic cable.
The MRT-860 transmitter accepts six video inputs and multiplexes these signals onto a
single optical output port for connection to the fiber transmission system.
Correspondingly, the MRR-860 receiver converts the optical signal to six independent
video output signals.
The 860 Series units operate on 50 um or 62.5 um multimode fiber. Refer to the data
sheets for detailed performance specifications.
The individual units may be configured for rack mounting or wall mounting depending
upon the position of the included mounting hardware.
INSTALLATION
THE INSTALLATION OF THESE UNITS SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON(S) AND MUST CONFORM TO ALL LOCAL CODES.
To install the MRT-860 or MRR-860 it is first necessary to mount the rack flanges to the
unit.
For rack mounting the ears are installed on the
sides of the unit with the surfaces that have
oval holes flush with the front of the unit as in
Figure 1. Mount the ears with the #10 flathead
screws provided. To mount in the rack cabinet,
use mounting screws that are appropriate for
the rack cabinet being used.
Содержание MRT-860
Страница 2: ...2 ...
