American Eagle SRS-40, Руководство пользователя

Страница: 21 / 36

Installation 17
Compressor Pressure Switch (RP/E Models Only)
Pressure Setting Instructions:
1. Always set the kick out pressure setting first. 145 psi minimum/150 psi maximum.
2. After kick out pressure is set, adjust the kick on screw setting at 115 psi minimum/120 psi
maximum.
3. Cycle compressor to verify correct settings.
4. For questions about this procedure, please contact Stellar Customer Service (Page 1).
Kick On (Step 2)
Pressure Setting
Adjustment Screw
(115-120 psi)
Kick Out (Step 1)
Pressure Setting
Adjustment Screw
(145-150 psi)
Note: Turning adjustment screws clockwise
increases psi settings. Turning adjustment screws
counterclockwise decreased psi settings.
+
+
-
-
Location inside box of SRS Compressors