American Eagle AE-MS9C Скачать руководство пользователя страница 3

AMERICAN EAGLE FOOD MACHINERY, INC. 

3557 South Halsted Street // Chicago, Illinois 60609-1606 

Tel (773) 376-0800 • Fax (773) 376-2010 • www.AmericanEagleMachine.com 

 

Meat Slicer Operating Manual

 

 

 

- 3 - 

 

DAILY CLEANING PROCEDURE FOR THE MACHINE 

• Always turn off and unplug the machine before cleaning, and make sure to turn the dial to zero position. 

• Never use any chemical or abrasive products. Use a damp cloth with mild soap or sanitizer to clean the 

machine. Make sure to wipe down the machine completely every day. 

IMPORTANT:

 Do not wash the 

machine by water directly, or use a very wet towel. 

• CAUTION: Wearing safety glove, remove the blade cover away from the blade to clean. Clean product 

carriage. Do not touch the edge of the blade. 

• Allow the blade to air dry by running for a few minutes after cleaning.   

 

MAINTAINING AND LUBRICATING THE SLICER 

Note: 

We recommend NSF approved meat slicer lubricant spray or grease for application on our slicers. 

Please check your local foodservice distributor catalog. 

 

Daily Maintainence 

Rustproofing the Blade 

Dry the blade with fry cloth after work. Spread oil on the edge of the blade with dry cloth. Sharpen the blade 

daily for best results. 

Pusher axle lubrication: 

Clean the pusher axle with dry cloth first. Put oil on the both of the axles and pull the pusher up and down to 

spread the oil evenly. It is suitable to lubricate the axle every day. 

 

Weekly Maintenance 

Guide lubrication: 

Push the carriage to one side, and clean the grease dirt of the guide with dry cloth. Smear the guide surface 

with food grade grease by finger, spread well. The guide should be lubricated once a week.   

Sharpener lubrication: 

Clean the sharpener axle before sharpening. Apply a thin coat of oil on the both of the axles. Turn around and 

slide the axle until the axles work well. 

Slice regulator lubrication: 

Turn the supporting knob behind panel counterclockwise to the max length. Clean the panel and slide rod. 

Apply a thin coat of oil. Turn the positioner back to the original position. Do not use too much oil if you 

lubricate every week. 

Содержание AE-MS9C

Страница 1: ... under water or place the machine under running water Doing so will damage parts and cause injury from electric shock Please turn off all switches when not operating and unplug Unplug the machine to clean or maintain Must to stop the machine operate when find the machine operate unusually Often to check blade cover table loading meat slice and other parts whether tight or damage Do not cut frozen ...

Страница 2: ... Turn the power button part 7 on and let the machine run about 2 3 minutes making sure the blade part 1 runs smoothly and quietly Verify that the blade is rotating counter clockwise 2 Be sure to loosen the knob located behind the slice thickness regulator This knob supports the panel 3 Adjust the blade by turning the adjustment dial part 8 to the desired thickness number New machines may be slight...

Страница 3: ...ur slicers Please check your local foodservice distributor catalog Daily Maintainence Rustproofing the Blade Dry the blade with fry cloth after work Spread oil on the edge of the blade with dry cloth Sharpen the blade daily for best results Pusher axle lubrication Clean the pusher axle with dry cloth first Put oil on the both of the axles and pull the pusher up and down to spread the oil evenly It...

Страница 4: ...pener axles After lubricating pull the sharpener completely out and turn 180º Press the right side stone down by finger and adjust the sharpener until it comes in contact with the blade Make sure that the surface of stone is sitting closely to the surface of edge If not please adjust it Turn the power on and let the blade work 1 2 minutes Stop the machine look if the blade is sharpened well If not...

Отзывы: