8000-1941-01, Rev. B1
CCTV PRODUCTS
1
SpeedDome® Ultra
Drone Installation
Overview
The SpeedDome Ultra Drone is an Ultra housing that
can be outfitted with a fixed camera. The drone looks
like a fully functional dome camera and can be used as
a deterrent.
Figure 1. SpeedDome Ultra Drone,
01RDULTRA
Main Components
The drone consists of a housing and an eyeball
assembly—yoke, yoke brackets, slot cover, and cable
assembly—that “twist locks” onto a mounting base
(Figure 2).
Installation Procedures
Detailed mounting instructions, using various mounting
techniques, are presented step-by-step in the
SpeedDome Ultra Camera Dome Installation and
Service Manual (8000-1362-01).
To install the drone to
a hard ceiling using the install kit provided, see below.
Installing Drone to Sheet Rock
and Wood Beams
The drone base can be mounted directly to a sheet rock
ceiling or wood beam by following the instructions
below.
Install Kit Required
Kit, Installation, Ultra Drone (0351-1309-01)
Anchor toggle
2
2880-0073-01
Screw, STAP, AB, 4.2X32 PHP
2
5810-4091-120
Washer, Flat, M4
2
5842-0300-020
Bracket, Base Mounting
2
0500-7193-01
Screw, 1/4-20x3/8,” PHP
1
2802-7407-65
Screw, PH, M3X-8, PHP, SS
6
5801-1051-120
Washer, 1/4, Flat
1
2848-8100-07
Figure 2. SpeedDome Ultra Drone—Exploded View
120 mm
(4.7 in.)
205 mm
(8 in.)
0.66 kg
(1.45 lbs)
SpeedDome is a registered trademark of Sensormatic Electronics Corporation.
Screws (3), M3X45 PHP,
5801-1141-111
Cap, 0500-7256-01
Skirt,
0500-6710-01
Pan Gear Bearing Assy,
2510-0040-02
Lens carriage
bearing assy,
2510-0038-02 (2)
Tape, PET, 3200-0309-01
Tape, PET, 3200-0309-01
Yoke Bracket, 0500-7254-01 (2)
Yoke,
0500-7258-01
Slot cover (without lens port),
0500-6709-02
Slot cover (with lens port),
0500-6709-01
Video cabling, 06003-0101-01;
Power cabling, 0650-1993-01
(including cable ties, 6009-0006)
Housing, 0500-7255-01
Dot, 3200-0027-04
Base, 0500-7257-01
