SpeedDome
®
Optima
Programmable Dome Cameras
Integral 22x optical zoom (11x digital) and 470 lines horizontal
resolution provide a quality, high-resolution picture.
Advanced third generation Digital Signal Processing (DSP) CCD
camera delivers sharp, detailed images.
Zoom Adjusted Program (ZAP) automatically adjusts pan and tilt
speeds in proportion to zoom position, even at 22x
magnification.
Automatic white balance allows the camera to automatically
adjust the white balance of the image, providing optimal image
quality.
The automatic focus provides clear images without the need for
manual adjustments.
The auto iris provides visible scenes without the user having to
manually compensate for diverse lighting conditions.
The dome’s endcap or flying lead connection method makes the
dome easy to install and service – as little as 15 minutes from box-
to-ceiling.
The dome is available in both indoor and outdoor versions.
The dome supports up to 96 user-definable presets and three
user-definable patterns.
Unshielded Twisted Pair (UTP) wiring video transmission enabled
as standard saves on wiring and installation costs.
The dome incorporates an automatic flip feature. This feature
enables the dome to automatically turn 180° when the camera
tilts to its lower limits and stays in that position for a brief
speed-proportional delay.
Vertical sync phase adjustment is provided to help compensate for
different phases of power when line-lock is enabled, making it
ideal for single and multi-phase power installations.
Surge protection.
Alarms are processed externally by the controller, and can
automatically call a preset, run a pattern, or activate an auxiliary
output when the alarm is activated.
The dome contains a series of diagnostic LEDs for power,
communication, network type and failure mode.
The fully isolated power supply helps eliminate ground loops.
Sensing of 50/60 Hz line is automatic and does not require man-
ual adjustment.
Allows daisy chain configuration of control wiring.
For RS-422/RS-485: 10 domes at a maximum distance of 1 km
on two 22 AWG shielded twisted pairs (STP).
For SensorNet: 32 devices at a maximum distance of 1 km on
one 22 AWG unshielded twisted pair (UTP).
For Manchester: 3 domes at a maximum distance of 1.5 km ) on
one 18 AWG shielded twisted pair (STP).
Selectable (on/off) home position.
Two Housing Options
The integral housing model, which is constructed of ABS plastic, is
suitable for both indoor and outdoor applications. This model
incorporates a flying lead connection for mechanical and electrical
cabling. The outdoor version of the integral housing model is weath-
er and tamper-proof, and contains a heater/blower that
protects the dome. In extreme temperatures, the housing’s built-in
fan prevents the dome from overheating, and the built-in thermostat
and heater prevent ice from forming on the outside bubble.
The in-ceiling model is designed with an integrated aluminum top
hat enclosure and plenum cap with swing-out tabs that grasp
ceiling material, ensuring a secure and easy installation. This model
utilizes a endcap connection for mechanical and electrical cabling.
The in-ceiling model is for indoor applications only.
Integrated Housing
Camera block
Bubble and trim ring
assembly
Integral Housing Model
Integrated Aluminum
Top Hat Enclosure
Camera block
Bubble and trim ring
Assembly
In-Ceiling Model
PSS075TFIS.qxp 22/05/2006 14:55 Page 2