American Dynamics Intellex DV16000 Скачать руководство пользователя страница 68

Страница: 68 / 201

Intellex

Digital Video Management System Installation and Operating Instructions

Schedule Setup

MORE>>>

Setup —

Select a filter for this segment; then click

Setup

configure it (see

Live Filter Configuration

Select another segment for configuration. Otherwise, click

accept the configuration for this segment as shown, and return to
the

Weekday

Weekend

Holiday

screen. Click

Cancel

to cancel

the changes and return to the

Weekday

Weekend

Holiday

screen. Click

Help

to display online help for this screen.

Configuring an Alarmed

Segment

Use the

Alarmed Segment

screen to configure the pre-alarm

record quality and duration for the segment as well as the live
filter.

Define the segment (see

Working with Schedule Segments

Use one of the following options to display the

Alarmed

Segment

screen:

•

Double-click the segment to configure.

•

Select the segment to configure; then click

Setup

•

Select the segment to configure; then access the custom
schedule popup menu (see

Custom Schedule Popup Menu

);

then select

Setup

Alarmed segment: (camera name) from hh:mm to hh:m m .—

Indicates the camera name and the segment’s start and end

times.

Pre-Alarm Quality —

Select the record quality for the pre-alarm

images recorded during this segment. The default is

Normal

NOTE: This quality setting only affects pre-alarm images. To set

the record quality of alarm images, refer to

Alarm

Operations

later in this chapter.

Super —

Record images at the highest image quality. Since

the unit uses the lowest level of compression, this setting
requires the highest amount of storage space.

Normal —

Record images at normal image quality. This

setting provides a balance between compression and storage
space requirements.

Extended Record —

Record images at the highest level of

compression. This setting requires the lowest amount of
storage space.

Содержание Intellex DV16000










































































































































































































Результаты поиска

Содержание Intellex DV16000

Отзывы:

American Dynamics Intellex DV16000, Инструкция по установке и эксплуатации, Страница: 68 / 201

Результаты поиска

Содержание Intellex DV16000

Отзывы: