INSTALLATION AND SERVICE GUIDE
DeltaDome II Camera Dome
8000-2708-01, REV. B
38
Lens Design
Type ....................................... Aspherical
Focal Length .......................... 4 to 88 mm
Aperture ................................. f1.6
Viewing Angle (equivalent to 8-80 mm on 1/2" CCD
array, or 11-110 mm on 2/3" CCD array):
4 mm .................................. 47.0°(H) x 35.2°(V)
64 mm ................................ 4.0°(H) x 3.0°(V)
Field-of-View Formulas:
3.2 mm* x distance from camera (m)
Focal length (mm)
= Horizontal view (m)
2.4 mm* x distance from camera (m)
Focal length (mm)
= Vertical view (m)
* Horizontal scanning area of pickup device (mm) in camera.
** Vertical scanning area of pickup device (mm) in camera.
Example:
Wide angle view with lens at 4mm and viewed
object at 10 m.
3.2 mm x 10 m
4 mm
= 8m Horizontal view (m)
2.4 mm x 10 m
4 mm
= 6m Vertical view (m)
Declarations
Regulatory Compliance
EMC ....................................... 47 CFR, Part 15,
Class A
EN55022 CL. B
EN50082-1
Safety ..................................... UL1950
CSA C22.2 No. 950
EN60950
FCC COMPLIANCE:
This equipment complies with Part 15 of the FCC rules for
Class A digital devices when installed and used in accordance
with the instruction manual. Following these rules provides
reasonable protection against harmful interference from
equipment operated in a commercial area. This equipment
should not be installed in a residential area as it can radiate
radio frequency energy that could interfere with radio
communications, a situation the user would have to fix at their
own expense.
CISPR 22:
WARNING: This is a class A product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate
measures.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly approved
by Sensormatic Electronics Corporation, the party responsible
for FCC compliance, could void the user's authority to operate
the equipment and could create a hazardous condition.
Other Declarations
WARRANTY DISCLAIMER:
Sensormatic Electronics Corporation makes no representation
or warranty with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness
for any particular purpose. Further, Sensormatic Electronics
Corporation reserves the right to revise this publication and
make changes from time to time in the content hereof without
obligation of Sensormatic Electronics Corporation to notify
any person of such revision or changes.
LIMITED RIGHTS NOTICE:
For units of the Department of Defense, all documentation and
manuals were developed at private expense and no part of it
was developed using Government Funds. The restrictions
governing the use and disclosure of technical data marked with
this legend are set forth in the definition of "limited rights" in
paragraph (a) (15) of the clause of DFARS 252.227.7013.
Unpublished - rights reserved under the Copyright Laws of the
United States.
