manualshive.com logo in svg

American Dryer Corp. Phase 7.4.2 DMC None, Руководство пользователя

Продукт American Dryer Corp. Фаза 7.4.2 DMC None идеально подойдет для вашего бизнеса. Вы можете бесплатно загрузить руководство по эксплуатации на manualshive.com. Необходимое оборудование теперь легко доступно для вас и ваших сотрудников. Узнайте больше о функциях и настройках этого продукта прямо сейчас!

Поделиться
Скачать
background image

17

TIME FOR TOP OFF 1 TO 99 MINUTES

This location determines the time that is vended once the AMOUNT FOR TOP OFF is met.  This is programmable
from 1 minute to 99 minutes, in 1 minute increments.  Each temperature setting has its own TIME FOR TOP
OFF so that each temperature setting can charge at a different rate.

TIME FOR TOP OFF is only used when the Phase 7 dual microprocessor controller (DMC) computer is set in
Accumulative Coin Mode.  When a cycle is started, the Phase 7 DMC (computer) uses TIME FOR AMOUNT
TO START 1 TO 99 MINUTES to determine the initial amount of time vended for a temperature key.  Once a
cycle is started, the Phase 7 DMC (computer) will then reference this TIME FOR TOP OFF for any additional
time needed, before any additional time is vended the user will first need to meet the AMOUNT FOR TOP OFF.
When a cycle is restarted from Pause Mode, the Phase 7 DMC (computer) will calculate how much time is left in
the cycle for the new temperature selected.  These calculations are based on a combination of the TIME FOR
AMOUNT TO START and TIME FOR TOP OFF for the new temperature key selected and the amount of credit
that was available at the time the Phase 7 DMC (computer) was placed into Pause Mode.  In Accumulative Coin
Mode, the AMOUNT TO START and AMOUNT FOR TOP OFF can differ, so the rate charged for TIME FOR
AMOUNT TO START and TIME FOR TOP OFF can be different.  The Phase 7 DMC (computer) accounts for
the different rates by tracking how much credit is available from AMOUNT TO START and the credit that is
available from TIME FOR TOP OFF.  Using these ratios of credit and time, the Phase 7 DMC (computer) will
determine how much time is left in the cycle for the new temperature key selected.

ENTER HIGH DRY TEMP 100 TO 190°F

Each temperature cycle “HIGH,” “MED,” and “LO” can be programmed to a dry temperature ranging from
100°F to 190°F (38°C to 87°C) in Radial Mode or 100°F to 150°F (38°C to 66°C) in Axial Mode.

COOL TIME 0 TO 9 MINUTES

Cool down time ranges from 0 to 9 minutes.  The cool down time occurs at the end of a dry cycle.  If your cool
down time is set to 4 minutes, the last 4 minutes of the dry cycle will be in Cool Down Mode.

PL #06 – VENDING PARAMETERS

CURRENCY SYMBOL

The Phase 7 DMC (computer) can be programmed to display 

ALL

 currency in one (1) of the following currency

symbols, a token mode, none, and no symbol or decimal point.

USD / UK Pound / EURO / Yen / Token / None / No Symbol or Decimal

NOTE:

When the Phase 7 DMC (computer) is set to TOKEN 

ALL

 of the coin related menu items

will change from currency to whole numbers.  The LEFT and RIGHT COIN VALUES will
change to a default of one (1) token.  The AMOUNT TO START and AMOUNT FOR TOP
OFF will also default to one (1).  If the currency symbol is changed back to a currency
symbol these menu items will change back to factory defaults.  The default setting are
LEFT COIN DENOMINATION – 0.25, RIGHT COIN DENOMINATION – 0.10,
AMOUNT TO START – 0.25, and AMOUNT FOR TOP OFF – 0.25.

Содержание Phase 7.4.2 DMC None













































































Отзывы:

Нет отзывов

Похожие инструкции для Phase 7.4.2 DMC None

Henny Penny CFE-415 Operator'S Manual preview
CFE-415
Бренд: Henny Penny Страницы: 82
Kitchen Couture DAF-530D-2 User Manual preview
DAF-530D-2
Бренд: Kitchen Couture Страницы: 14
American Dryer Corp. AD-202 Operation Manual preview
AD-202
Бренд: American Dryer Corp. Страницы: 62
Giorik 921PGC Instruction Manual preview
921PGC
Бренд: Giorik Страницы: 46
GE Profile UPVH890 Owner'S Manual & Installation Instructions preview
Profile UPVH890
Бренд: GE Страницы: 152
GE Profile Harmony PTDN805EM Owner'S Manual And Installation Instructions preview
Profile Harmony PTDN805EM
Бренд: GE Страницы: 76
Hamilton Beach HBFDR3206 Instruction Manual preview
HBFDR3206
Бренд: Hamilton Beach Страницы: 40
Masterbuilt 20010610 Assembly, Care & Use Manual preview
20010610
Бренд: Masterbuilt Страницы: 16
Blue Seal Evolution GT18 Series Installation And Operation Manual preview
Evolution GT18 Series
Бренд: Blue Seal Страницы: 19
Emeril Lagasse French Door Airfryer 360 FAFO-001 Owner'S Manual preview
French Door Airfryer 360 FAFO-001
Бренд: Emeril Lagasse Страницы: 24
Caple WDi2203 Instruction Manual preview
WDi2203
Бренд: Caple Страницы: 24
Panasonic NH-P8ER1 Operating & Installation Instructions Manual preview
NH-P8ER1
Бренд: Panasonic Страницы: 48
Campomatic D807e Instruction Manual preview
D807e
Бренд: Campomatic Страницы: 45
Sharp KD-NHH9S8GW3-PL User Manual preview
KD-NHH9S8GW3-PL
Бренд: Sharp Страницы: 35
Whirlpool WGD6600VU Quick Start Manual preview
WGD6600VU
Бренд: Whirlpool Страницы: 4
Whirlpool WGD5100S Dimensions preview
WGD5100S
Бренд: Whirlpool Страницы: 1
Whirlpool WGD5000V Dimensions And Installation Information preview
WGD5000V
Бренд: Whirlpool Страницы: 1
Whirlpool WGD6400SW0 Tech Sheet preview
WGD6400SW0
Бренд: Whirlpool Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды