American Dryer Corp. ML-122, Инструкция по эксплуатации и запасным частям

Страница: 22 / 35

20
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Hot Surface Ignition (HSI) Burner Assembly
Illus. No. Part No. Qty. Description
7 142601 1 3/4” Union
8 142710 1 3/4” x 4” Nipple
9 142504 1 3/4” x 90º Elbow
10 142734 1 3/4” x 5-1/2” Nipple
11 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
12 390125 1 Pipe Bracket
13 140026 1 3/4” 24 VAC Redundant (natural gas) Gas Valve
881868 1 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
14 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
15 331291 1 Pipe Bracket
16 141208 1 3-Port Manifold
17* 140839 3 #2 Burner Orifice (natural gas Only)
140819 3 #30 Burner Orifice (liquid Propane [L.P.] gas Only)
18 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
19 881492 3 Burner Tube w/ bracket
20 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
21 331287 1 Burner Tube Support ONLY
22 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
23 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
24 -------- 1 Sail Switch
(refer to
Sail Switch Assembly on page 21 )
25 390098 1 Burner Box Cover Plate ONLY
26 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
27 881597 1 Hot Surface Ignition (HSI) Ignitor
28 128921 1 Hot Surface Ignition (HSI) Flame Sensor
29 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw
30 151000 2 #6-32 Pal Nut
31 130201 1 330º Manual Reset Hi-Limit ONLY
32 821457 1 Hi-Limit Bracket
33* 816084 1 Hot Surface Ignition (HSI) Liquid Propane (L.P.)
Gas Burner Assembly Complete
(includes illus. nos. 1 through 37)
816083 1 Hot Surface Ignition (HSI) Natural Gas Burner Assembly Complete
(includes illus. nos 1 through 36)
820201 1 Burner Box ONLY
34 335031 1 Hot Surface Ignition (HSI) Module Mounting Bracket/Manifold Rest
35 881797 1 Hot Surface Ignition (HSI) Module II
36 150309 6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
37 332256 1 Liquid Propane (L.P.) Burner Baffle
(for models mfd. liquid propane [L.P.] gas Only)
* Consult factory for elevations over 2,000 feet.
continued from page 19