
Note: Correct DMX addressing is absolutely essential to the use of this equipment. If you
have never addressed DMX512 equipment before, please read the "DMX512 Basics" manual
.
6. Turn on Power. All of
X-TREME 19C
LEDs will light up in a pre-programmed test sequence.
When the test sequence is completed, the controller is ready for use.
7. Choose a projector by pressing the projector key. "Projector one" will control channels 1-4. The
DIP switch on your first projector should be set to DMX512 address" 1 ". See appendix for
addressing chart.
8. If your equipment has the correct DMX address, by slowly moving the sliders up from 0, you
should be able to control the functions of your projector. The joystick should control the
movement of the mirror. If the projector does not respond to the movement of the sliders, the
problem is probably not in the controller- the DMX address on your projector is probably
incorrect. Review the "DMX512 Basics" manual to make sure you have set the equipment
address correctly.
9. Once you have become familiar with all the functions of your projectors and all of your projec-
tors
can be controlled, move on to Basic Play.
Basic Play
:
1.
Choose a projector:
a.Press the projector key(s) for the projector(s) you wish to control.
b.Open the shutter using the
GOBO
slider(16).
c.Use joystick to place beam in desired location.
2.
Adding Motion:
a.Set
Speed
(13)and
Rate
(14) sliders to zero
b.Press a
Motion
key(2) - See Appendix for Motion Chart
c.Use
Speed
slider(13) to adjust speed of the movement
d.Use
Level
(12) key to select small to large motion levels 1-4
e.Select a
Fade
(11), for fast and hard, for slow and smooth
f.Select a
Direction
(2b): Clockwise is standard or you can use the Counterclockwise or
Bi-direction keys.
g.For perfect motion Adjust speed(14).
h Wrong location? Use joystick(17) to place motion.
3.
Final touch:
Now use the other sliders to add,
colo
r(15),
gobo
(16)
, strobe
(Gobo to 10)
.
4. Repeat steps 1-3 until all your projectors are set.
© American DJ® Los Angeles, CA. 90058 - X-Treme/19C™ User Instructions Page 3
User Instructions - X-Treme/19C™
American DJ
®