American DJ
®
- www.americandj.com - X-Move LED Plus R Instruction Manual Page 17
X-Move LED Plus R
DMX Traits
Channel
Value
Function
6 SHUTTER/STROBE
0 - 7 BLACKOUT
8 - 15 SHUTTER OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 SHUTTER OPEN
140 - 180 SHUTTER SLOW OPEN - FAST CLOSE
181 - 190 SHUTTER OPEN
191 - 231 SHUTTER FAST OPEN - SLOW CLOSE
232 - 239 SHUTTER OPEN
240 - 247 RANDOM STROBE
248 - 255 SHUTTER OPEN
7 0 - 255 DIMMER 0% - 100%
8 MOVING HEAD MOVEMENT
0 - 7 NO FUNCTION
8 - 28 MOVEMENT 1
29 - 49 MOVEMENT 2
50 - 70 MOVEMENT 3
71 - 91 MOVEMENT 4
92 - 112 MOVEMENT 5
113 - 133 MOVEMENT 6
134 - 154 MOVEMENT 7
155 - 175 MOVEMENT 8
176 - 196 MOVEMENT 9
197 - 217 MOVEMENT 10
218 - 238 MOVEMENT 11
239 - 255 MOVEMENT 12
9 0 - 255 MOVEMENT SPEED FAST - SLOW
American DJ
®
- www.americandj.com - X-Move LED Plus R Instruction Manual Page 18
X-Move LED Plus R Gobo Replacement
This unit comes with interchangable gobos. When changing
the gobos please be very careful. Follow the instructions below,
and see the figure pictures on the next page.
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
moving head. The top half of the moving head does not
have the lens attached to it. The lens is on the top half of the
head (Figure 1).
2. Unscrew the 3 phillips screws that secure the top half of the
head. Remove the top half of the head.
3. When you remove the shell you will be able to access the
gobo wheel. Rotate the head so that the lens is aimed up
(Figure 2). Turn the gobo wheel with your hand until you
find the gobo you would like to change, then turn the color
wheel until the empty space (spot) is below your desired
gobo.
4. Using a pair of needle nose pliers, grab the fixture ring that
holds the gobo in place and remove the ring (Figure 3).
5. Once the ring is removed, carefully use your finger to push
the gobo up and out (Figure 3). You can then tilt the head so
that the gobo falls into your hand (Figure 4).
6. Carefully insert your new gobo and insert the fixture-ring.
7. Reassemble the unit.