background image

American DJ

®

  -  www.americandj.com  - X-Color LED™ Instruction Manual Page 10

American DJ

®

  -  www.americandj.com  - X-Color LED™ Instruction Manual Page 9

SLND -

 This will let you set unit as a slave in a master/

slave configuration.

1. Tap the MENU button until “

SLND

” is displayed, press 

ENTER. Either “

SL 1

”, “

SL 2

”, “

SL 3

”, or “

SL 4

” will be displayed.

2. Tap the UP or DOWN buttons until your desired slave mode 

setting is displayed, press ENTER to confim. Each slave mode 

is a different light show.

NOTE:

 In a Master/Slave configuration you can set one fixture 

to Master and then set the next fixture to “

SL 2

”, the fixtures will 

now have contrast movement to each other. 

SOUN -

 Sound Active mode.

1. Tap the MENU button until “

SOUN

” is displayed, press 

ENTER.
2. The display will show either “

ON” 

or

 “OFF

”. Press the UP or 

DOWN buttons to select “

ON

” to activate sound active mode, or 

OFF

” to deactivate sound active mode.

3. Press ENTER to confirm.

BLND -

 Blackout or Stand by mode.

1. Tap the either the MENU button until “

BLND

” is displayed, 

press ENTER. Either Yes or No will be displayed. 
2. To activate Blackout tap the UP or DOWN buttons until Yes is 

displayed, press ENTER to confim and exit. The fixture will now 

be in Blackout mode. To deactivate Blackout mode, select No 
and press Enter.

LED -

 With this function you can have the LED display 

turn off after 10 seconds.

1. Tap the MENU button until “

LED

” is displayed, press ENTER.

2. The display will show either “

ON” 

or

 “OFF

”. Press the UP or 

 X-Color LED™ 

 

 

 

             System Menu

DOWN buttons to select “

ON

” to keep the LED display on at 

all times, or “

OFF

” to switch to have the LED display switch off 

after 10 seconds.

3. Press ENTER to confirm.

DISP

 

This function will reverse the display 180º.

1. Tap the MENU button until “

DISP

” is displayed, press ENTER.

2. Press ENTER to “flip” the display. Press ENTER to “flip” it 

again. Press ENTER when you have made your desired setup.

TEST

 - This function will run a self test program. 

1. Tap the MENU button until “

TEST

” is displayed, press ENTER.

2. The fixture will now run a self test.

TEMP

 - With this function you can check the temperature 

of the fixture.

1. Tap the MENU button until “

TEMP

” is displayed, press ENTER.

2. The running time of the fixture will now be displayed. Press 
MENU to exit.

FHRS

 - With this function you can display the running time 

of the fixture.

1. Tap the MENU button until “

FHRS

” is displayed, press 

ENTER.

2. The running time of the fixture will now be displayed. Press 
MENU to exit.

VER

 - With this function you can display the version soft-

ware of the fixture.

1. Tap the MENU button until “

VER

” is displayed, press ENTER.

2. The software version will now be displayed. Press MENU to 

 X-Color LED™ 

 

 

 

             System Menu

Содержание X-Color LED











Отзывы: