Set Speed In Auto Mode -
1) The Tap Sync button is used to set and synchronize the speed time
by tapping the button several times. The speed time will synchronize
to the time of the last two taps. The Tap Sync button LED will flash
with the new Chase time. The speed time may be set anytime wheth-
er or not a program is running
2) Tap Sync will override any previous setting of the speed slider con-
trol until the slider is moved again.
3) Use of Tap Sync in setting a standard beat is the same with speed
control slider.
Check Step In Chases - There are two ways to check the Steps in
Chases.
1st:
1) Press the Chase button to select the desired chase you wish to
check, and the Chase button LED will flash. The LCD will display how
many Steps have already been stored in the chase.
2) Press the Bank Up/Down button to scroll to the Step you wish to
check. You can read the Steps in the LCD Display.
2nd:
1) Enter program mode (See Enabling Program Mode).
2) Press the Chase button to select the desired chase you wish to
check. The LCD will display how many steps have already been
stored in the chase.
3) Press the Tap sync button.
4) Press the bank Up/Down button to scroll to the step you wish to
check. You can read the steps in the LCD Display.
BLACKOUT
There are two functions within Blackout.
Pause The Whole Output -
1) Press the Blackout button and the button LED will glow. When you
press the button it will pause all output from the controller. Press the
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 19
WiFly WLC16 Operation
ADJ Products, LLC www.adj.com - WiFly WLC16 Page 18
3) Press the Tap Sync button.
4) Press the Bank Up/Down button to select Step 3. You can see the
Steps in the LCD Display.
5) Press the Delete button. The LCD displays “Delete this step? Press
Delete to confirm. Press add to cancel”.
6) When you press the Delete button again, the LCD will display
”Step Deleted”. Now the previous Step 4 turns into Step 3, and the
previous Step 5 turns into Step 4, and so on.
Delete A Chase -
1) Enter program mode (See Enabling Program Mode).
2) Press the button corresponding to the chase you wish to delete.
3) Press the Delete button. The LCD displays “Delete this chase?
Press Delete to confirm. Press add to cancel”.
4) When you press the Delete button again, the LCD will display
”Chase Deleted”. You have now deleted the Chase. If the LCD dis-
plays ”Deleted fail”, it means the scene delete failed.
Delete all Chases -
1) Enter program mode (See Enabling Program Mode).
2) Press the any one of the chase buttons.
3) Press any one of the scene buttons to set to scene 0.
4) Press and hold the DELETE button for about 15 seconds. The LCD
will display “Delete all chases? Press Delete to confirm. Press add to
cancel”.
5) When you press the Delete button again, the LCD will display
”Chases Deleted”. You have now deleted all of the Chases. If the
LCD displays ”Deleted fail”, it means the Chases delete failed.
TAP SYNC
This button has 2 functions, to set the speed time in auto mode and
to check the Step in Chases.
WiFly WLC16 Operation
